Why does choosing a hammer drill put the hobbyist in a difficult position? We most often approach the issue based on a certain budget. Upon closer examination, in addition to cost and power, new criteria for comparison open up. Among others, the location of the drive, the number of operating modes, and this is only a small part of the parameters that should be taken into account. We have compiled a rating of the most reliable rotary hammers for 2019-2020. We hope that you will find an instrument that will become a faithful friend for many years to come.

The chance of choosing the ideal option increases if you remember that externally similar models can differ significantly even in terms of maintenance, despite their power and weight.

Power consumption should be taken into account when working in conditions of unstable power supply. When choosing a hammer drill for working on brick and lightweight concrete, you should pay attention to the power and frequency of impact, and shaft rotation indicators. The table below will help you get a good idea of ​​the models in different price categories.

Budget tool - for rare jobs

It is advisable to choose inexpensive hammer drills if the intended minor work is not of a permanent nature. In this case, the efficiency of use and service life of the tool will please every amateur.

1. KRÜGER 1400 W - 4490 rub.

The KRUGER electric rotary hammer impresses with its impact-resistant housing and rich equipment. The product is distinguished by its ergonomics and thoughtful design:

• the powerful engine will last a long time and will help solve many household problems;
• several operating modes, DFR and SDS+ cartridges make the tool universal;
• a switch with an accelerator function allows you to smoothly adjust the drilling speed;
• switch lock ensures convenience during long-term operation;
• reverse simplifies working with complex materials;
• an additional handle makes the device more ergonomic;
• The power cable is located where it belongs - it will not interfere with work

The kit includes the hammer drill itself, an additional keyless chuck, an additional rubberized handle and depth gauge, 3 drills, a pick and a drill.

2. Hammer PRT 650 A – RUB 3,999.

If you do not take into account the persistent smell of chemical modifiers responsible for the strength of the plastic, then the capabilities of the PRT 650 A model from Hammer definitely deserve respect. Impact energy and low (but effectively reducing recoil during impact drilling) weight play a huge role in the formation of potential.

Overall, it’s a worthy tool that allows you to hang a chandelier and cornice yourself, knock old tiles off the walls and floor, and secure baseboards.

Theoretically, the PRT 650 A, with its set of bits, should also cope with the transfer of electrical points in the apartment. But, judging by the reviews, chipping on a large scale negatively affects the performance of a budget hammer drill. While infrequent use allows you to count on a fairly long service life.

Among other things, a reluctance to understand the instructions leads to misconceptions about a Chinese-assembled tool. The same well-known “shortcoming” associated with the haphazard disappearance of the impact is caused by the design features of the impact mechanism and appears in those users who allow operation in drilling mode with impact, without load. This problem is not a warranty case and can be “treated” by sharply lowering the drill installed in the chuck once.

3. DeFort DRH-800N-K – 3350 rub.

As the practical experience of the owners shows, the capabilities of this model cover the needs of the average user. The impact energy of 3.3 J and 3.3 kg of weight at low speeds allow you to quickly make holes not only for a picture or for a TV bracket. Even apartment renovations performed with the DRH-800N-K will not take much time.

• 3 drills, a chisel and a pick included, for full operation in each available mode;
• electronic speed control allows you to change the rotation speed (a necessary measure for comfortable work on tiles, bricks and metal);
• the presence of reverse determines the ability to change the direction of rotation of the equipment without loss of power. Allows you to immediately remove a stuck drill;
• spacious plastic suitcase.

This set from DeFort is easy to work with and very easy to store construction tools.

4. Interskol P 22 620 ER – 3443 rub.

Absolutely all the work that you have to deal with in your own home and country house can be done with the Interskol P 22 620 ER hammer drill. The only thing that can somewhat darken the user’s mood is the 2 operating modes of the tool. But it should be understood that the absence of a chiselling mode is critical for a professional (it is not possible to perform chiselling for wiring and widening openings in reinforced concrete slabs). For an amateur to independently decorate his home and subsequently maintain the premises in a presentable form, the capabilities of the P 22 620 ER are sufficient:

• Adjusting the speed and reverse allows you to abandon the use of a drill and easily remove equipment jammed in concrete.
• Fixing the trigger is responsible for convenience in the process of mixing solutions.
• The safety clutch protects the operator's hands and face from unexpected blows when the drill jams.
• The SDS+ system ensures quick replacement of drills (chisels, picks) in the chuck.

5. BORT BHD-900 – 4168 rub.

The technologies introduced into this horizontal hammer drill make it possible to carry out finishing work indoors at a relatively low cost, without focusing on the material of the walls. This argument is supported by:

• presence of reverse
• key chuck (with SDS+ adapter)
• the presence of three modes (drilling with and without impact, chiselling).

And if you exclude contact of a working drill with reinforcement (for example, using a hidden wiring scanner), then the potential of the BORT BHD-900 model will be sufficient for through drilling of interior reinforced concrete slabs.

Despite the claimed impressive performance, this tool is not intended to work with either unstressed or, especially, impact drills. In everyday conditions, the same sub-sections are drilled with a small-diameter drill in a circle, after which the resulting “sieve” is broken with a chisel.

6. Hyundai H 850 – 4503 rub.

The model, initially positioned as a household tool in the middle price segment, can only formally (because it costs up to 5,000 rubles) be classified as a budget hammer drill. Indeed, thanks to the presence

• reverse,
• 3 full operating modes and an additional function that expands the chiselling capabilities,
• electronic speed control (trigger),

This device is capable of not only chiseling and drilling, but also drilling quite well. The ability to lock the spindle for a “clean” blow in a certain position (the 4th function, which with drilling options is immortalized by a massive bas-relief “4 functions”) - brings the Hyundai H 850 as close as possible to a consistently popular middle-class tool.

It is known that domestic consumers have a negative attitude towards the drills that come with this model. But here it should be understood that this equipment is a consumable material, even if it is not of very high quality. And coupled with a relatively short power cable and a mediocre case, this manufacturer’s approach can be regarded as an excellent attempt to reduce the cost of the kit without significantly compromising the quality of the tool.

Middle class - a reliable tool for amateurs and professionals

No category of construction power tools is as popular as middle-class rotary hammers. After all, the opportunity to hold in your hands the products of world-famous companies, as well as the ratio of cost and potential, do not leave either amateurs or professionals indifferent.

7. Bison Salary 900 EK – 5100 rub.

Based on the design features and thanks to the set of implemented technologies, the Zubr ZP 900 EK hammer drill is considered to be an analogue of expensive professional equipment. After all, there is everything here that is somehow implemented in a branded tool.

• Keyless chuck (SDS+) with dust protection,
• metal housing of the impact mechanism,
• sophisticated anti-vibration system,
• the handles are made of materials that prevent the tool from slipping during operation,
• 3 standard operating modes,

reinforced by 5 with a small kilogram of weight and the vertical position of the electric motor, they bring the ZP 900 EK to the level of a good household tool. Even with a claim to professional use. After all, for this model, the loads are not critical either when working with a drill with a diameter of up to 28 mm, or with non-impact bits, or during the chipping process.

8. DeWalt D25103K – 7031 rub.

Thanks to the price of the D25103K horizontal rotary hammer, the potential of professional equipment has become accessible to the average amateur. This means that independent performance of a wide range of repair and finishing work will not be overshadowed

• frequent engine overheating, requiring prolonged rest
• unstable operation of the impact mechanism (due to design features and, at the same time, an easily solvable problem in most models of inexpensive tools)
• injuries received during operation.

The reasons for this are, respectively:

• low shaft speed
• design features of the impact bolt that prevent it from jamming when operating without load
• the presence of a safety clutch that stops the transmission of torque to the shaft immediately when the drill, chisel or lance is blocked.

Thus, domestic consumers will never lose interest in a decent branded instrument, even if it is made in China (affects only the final cost).

9. Bosch PBN 300 FRE – 7068 rub.

Like most mid-range models, the PBN 300 FRE comes in a plastic case, with an auxiliary handle, a depth stop, a set of branded bits, a chisel and a quick-release chuck for regular drills. But such possibilities as:

• work with crowns (up to 68 mm in diameter), which allows you to minimize the time for preparing places for sockets and switches;
• adjusting the number of revolutions, which makes it possible to avoid chipping the plaster when drilling, and correctly (without aerating the solution) mix 20-25 kg of dry mixture with water;
• safety clutch, which reduces the risk of injury if a drill or bit gets jammed during operation of the tool,

and others, indicate that this hammer drill belongs to the professional models. And only the price reminds you that this is a middle-class instrument. Theoretically, this is the possibility of long-term use in domestic conditions. But in fact, domestic professionals use such a tool quite often. Since, with a proportionate load and timely maintenance, even the “green” series from Bosch is capable of showing decent results throughout its entire service life.

10. AEG KH24E – 7300 rub.

The 2009 restyling did not affect the appearance of the KH24E; the main changes were made to the “filling” of the instrument. For example, in the updated models the impact force was slightly reduced, which increased the accuracy and duration of work. Due to this, this hammer drill is suitable

• amateur, because in order to use the full potential of the model, it will take more than one year and a wide range of interests (the manufacturer allows work on wood, metal, concrete)
• a professional who will come up with the need for the first maintenance in about a year (the service life of the new KH24E has increased due to the reduction in power).

At the same time, each of them will appreciate the elastic coating of the handle, the ability to adjust the speed by pressing the trigger, and the presence of a quick-release chuck with a shank included in the kit.

11. Makita HR2470 – 7469 rub.

The ease of working with Makita horizontal rotary hammers, proven in practice, is also inherent in the 2470 model. Relatively low weight with sufficient impact force and smooth adjustment of shaft speed are successfully complemented by comfortable handles with anti-slip coating and a full range of operating functions

The existing ability to fix the bit in one of 40 preset positions reduces labor intensity and increases the accuracy of the chiselling process.

The SDS+ system ensures quick drill replacement. The permissible parameters of processed wood, steel and concrete fully cover the needs of home or country repairs. Therefore, model 2470 is in demand not only by amateurs, but also by professionals specializing in finishing work.

Professional tool – precision and comfort in work

The high cost of a professional power tool does not imply its ability to withstand extreme loads. It guarantees only precision in every process, ease of use in any situation and a long service life.

12. Makita HR2450FT – 7948 rub.

While similar in appearance to other models in this line, the 2450FT rotary hammer differs in that its potential is worthy of professional use. This is supported by:

• permission to work with crowns with a diameter of up to 65 mm
• optimal ratio of power and impact frequency for finishing work
• presence of work area illumination
• system for quick replacement of the SDS+ chuck with a quick-release chuck for a conventional drill
• the presence of a safety clutch and anti-slip inserts under the arm.

The implementation of the reverse function in this model also deserves special attention - when switching the direction of rotation, a mechanical limitation of the trigger displacement occurs. Due to this, the reverse rotation speed does not exceed half of that declared by the manufacturer.

13. Bosch GBH 2-26 DFR – 9158 rub.

The main feature of operating the GBH 2-26 DFR rotary hammer is that, thanks to the materials and technologies used, the accuracy of the work always remains at a high level. Thanks to reliable mechanisms, the tool is capable of performing intensive work

• impact drilling with drills
• light chiselling
• drilling on bricks with a non-impact bit with a diameter of up to 68 mm
• work with equipment with cylindrical shanks.

Wherein,

• double insulation that protects the user from the consequences of a breakdown of a hidden cable;
• safety clutch that stops the transmission of torque to the shaft when the equipment jams,
• rubber pads that prevent the tool from slipping out of your hands,

make the work of professionals quite comfortable and safe.

14. Hitachi DH24PC3 – 8876 rub.

Professionals claim that the accuracy of the Hitachi dh24pc3 rotary hammer is ensured not only due to a synchronous increase in the impact frequency and shaft rotation speed.

• Correct tool balancing
• light weight
• ergonomic handles with rubber inserts
• convenient control of three operating modes and reverse function,

also have a significant impact on the precision of the workflow.

The absence of any drills or additional cartridges in the package is another point that indicates that the hammer drill is intended for professional use. All necessary equipment is always purchased for a specific type of work. Therefore, Hitachi dh24pc3 is equipped with only a spacious suitcase, an additional handle and a drilling depth limiter.

15. Bosch GBH 2-28 DFV Professional – RUB 10,495.

The declared potential of the GBH 2-28 DFV is supported by the design features of the model. These include systems that provide

• quick cartridge replacement,
• fixing the bit in any position,
• reduction of tool vibration,
• blocking torque without stopping the engine when the nozzle jams.

It should be remembered that the configuration of this hammer drill will suit only professionals. Because the absence of a drill, chisel or pick is not critical for this category of craftsmen. Each has its own specifics of work, and therefore its own set of equipment. But from a set of

• 2 quick-release chucks (one for drills, with a smooth shank, up to 13 mm in diameter, the other with an SDS+ clamp),
• drill limiter 210 mm,
• additional handle,
• napkins,
• case,

Even those specialists who constantly work with Bosch tools will not refuse.

16. Interskol PA-10/14.4R-2 – 7529 rub.

The modest capabilities of the PA-10/14.4R cordless hammer drill (drilling with and without impact) are compensated by its minimal dimensions and sufficient impact energy. According to practicing professionals, this combination of performance characteristics allows high-quality holes to be made in wood, metal and concrete.

• A pair of batteries is enough to work without long breaks for recharging (the potential of one is 25 holes 8x50 mm).
• The electronic motor brake prevents the drill or drill from rotating due to inertia. Stopping the rotation the moment the master releases the trigger.
• The backlight helps you see possible mistakes when drilling in poorly lit or hard-to-reach places.
• A three-section indicator indicates the current battery charge level.
• The convenient shape of the hammer drill allows it to be placed in a belt holster.

All devices necessary for full operation of the PA-10/14.4R-2 are placed in a small case. Therefore, users have no problems with either storing or transporting the cordless tool.

Editor's Choice

Despite the objective difficulty of choosing the best model, it is worth noting the capabilities of the Hammer PRT 650 A - its low cost and decent performance distinguish this instrument from its closest budget-class competitors.

In the middle price segment, the Makita 2470 and AEG KH24E will cope equally effectively with the needs of amateurs and the demands of specialists. Some will certainly be satisfied with the current price of branded models, while others will make a choice based on its potential.

Any task related to the repair and decoration of premises can be accomplished by every rotary hammer from the professional segment. But those who make money in construction consider accuracy and ease of use, rather than versatility or price, to be the basis for choosing the right tool. From these positions, compliance is observed with both the Hitachi DH24PC3 and the Bosch GBH 2-28 DFV Professional, and the battery-powered Interskol PA-10/14.4R-2, as a lightweight “dowel rod”, is generally beyond competition.

Summary

No matter how attractive this or that model may be to you, you should not make quick conclusions. Only a thorough analysis of your needs and the potential of the rotary hammers available on the local market will determine a worthwhile investment in a construction tool.

For many workers, a drill is an essential tool to have for both household and professional work. Such a tool should not only be reliable, but also practical to use. There are many types of drills.

The choice of drill will depend on the purpose and specifics of the work, technical characteristics, as well as a set of built-in functions, which include the presence of impact and rotation speed adjustment.

All drills are divided into professional and household classes. Drills come in impact and non-impact types. An impact drill is universal because it can be used to work with different materials, for example, concrete, wood, stone, brick, plastic. This became possible thanks to the switchable impact function, without which it would be problematic to work with many materials, for example, concrete, stone and brick. To perform high-precision work, experts recommend using hammerless drills.

When choosing a drill, the manufacturer will play an important role. Many people are interested in the question of which drill manufacturer would be better: Interskol or Zubr.

Zubr is one of the few manufacturers of high-quality power tools in Russia. When developing models, a number of nuances are taken into account, including the ability to work with different materials, the ability to work at low temperatures, and much more. It’s good when a drill can perform several tasks, for example, it can turn from a door into a screwdriver, mixer or hammer drill. Nozzles and drills can be sold as a set or at retail.

Interskol drills are characterized by excellent ergonomic characteristics and well-thought-out power for various purposes. Drilling with such a tool will be not only convenient, but also reliable. All drills are equipped with a rubber gasket, which is designed to prevent slipping on the handle. Many models have a built-in drilling speed control function.

Tools from the manufacturer Interskol have a high build quality, as well as all component materials, and both amateurs and professionals will be able to choose the most suitable option for the job. It is worth noting that the most critical parts are made of special alloys. All tools from Interskol have certificates confirming product quality. The developers paid special attention to the design of their products, since it will be much more pleasant to work with a tool that not only looks good, but also fits comfortably in the hand.

If you earn money doing repairs or do it for yourself, it’s worth purchasing a Zubr hammer drill. The manufacturer produces professional models and hammer drills for home use. Zubr products are cheaper than foreign analogues with a similar set of functions, so they are often purchased. The manufacturer provides a 5-year warranty on all models.

Bison ZP-800EK - a “hard worker” and a reliable assistant in repairs

Withstands significant loads, such as drilling ventilation holes in a concrete base. The main thing is to operate it correctly and lubricate the unit with lubricant. The model is not professional, but it is often bought by private craftsmen who offer home repairs. Power - 800 W, this is not the “limit of perfection”, but enough for home use.

Advantages:

• Resistant to loads - suitable for drilling concrete, brick, metal and other surfaces.
• Affordable price - this is due to the fact that the unit is not professional with low power.
• It has 3 operating modes - drilling, impact, drilling + impact, reverse, metal gearbox.
• Lightweight, fits comfortably in the hand, weight 3 kg. The rubberized handle prevents slipping during operation.
• Powered by mains power - no need to worry about charging the battery, it's always ready to go.
• Supplied in a case where it is convenient to store.

Flaws:

• modest equipment - the case contains the hammer drill itself and a replaceable cartridge.

Horizontal hammer drill Zubr P-26-800 - productive and stylish

Suitable for chiselling and drilling concrete, installing holes in metal. When installing the appropriate attachment, it turns into a mixer. A relatively new model that has gained popularity in the repair industry. Thanks to its thoughtful design and ergonomics, the tool is comfortable to work with.

Advantages:

• Smooth adjustment of speed at low speeds and productivity at high speeds increases drilling speed and increases productivity.
• Thanks to the reversing function, the hammer drill can be used as a drill and screwdriver. There is a function to rotate the bit to the desired position.
• The hammer drill is equipped with an additional handle with a depth limiter, which makes the work safe.
• The manufacturer has paid due attention to safety by equipping the hammer drill with a safety clutch to protect the operator when the drill is blocked.

Flaws:

• Some users consider the product fragility. Perhaps the case is not super durable and not everyone liked the updated design.

Rotary hammer ZP-26-750 EK - the best in its class

Reliable and easy-to-use hammer drill of the “Master” series. Convenient hammer drill for home use. Thanks to the light weight and vertical layout of the impact mechanism, the impact force is greater and it is even more convenient to work! This model is often purchased for installing suspended ceilings - not every hammer drill will drill holes in a concrete ceiling in a minute, so that the hand does not have time to get tired.

Advantages:

• Powered by mains power, the cord is long enough. It is convenient to work both in a large room and in a limited space.
• There is a shockless mode of operation, which expands the functionality. Working in drill mode, the tool will “get” to secluded places and narrow niches.
• Coping with all the complexities of repairs, including knocking down plaster and drilling holes in different surfaces.
• The light weight of the product is a little more than 3 kg, it fits comfortably in the hand, and thanks to the rubberized handle it does not slip.

Flaws:

• It is not possible to contact the manufacturer directly;
• There is no reverse;
• There is no speed control, although they are in the description, you need to change the characteristic.

Professional "Bisons"

SDS-plus P-22-650 - multifunctional hammer drill

A powerful tool for quick and easy chiseling of concrete, drilling holes in brick, metal, wood. A wide range of settings will make the work as efficient as possible. Like other models, it comes in a case that is convenient to transport.

Advantages:

• Convenient hammer drill for home use. Thanks to the higher drilling speed, the job gets done faster.
• Refers to percussion instruments, but it is possible to work without impact, which increases the list of tasks performed. Using the reversing function, the unit turns into a screwdriver or drill.
• The tool is wear-resistant - it withstands daily loads in the form of crushing, scoring, drilling.
• Good value for money - inexpensive, with a 5-year warranty. This indicates that during this time the tool works properly under heavy loads.

Flaws:

• When working frequently with metal structures, the gears wear out and replacement takes time, even if repairs are free under warranty.

Bison ZP-18-470 SDS-plus - a true professional

New model with increased power. It has a low level of vibration. Suitable for repairs in the countryside, in the apartment, it easily copes with the tasks. It only takes 30 seconds to drill a hole in concrete! If 20 points in concrete in 30 minutes is enough for your professional work, this model is worth purchasing!

Advantages:

• Improved impact mechanism for even greater performance.
• Light weight - only 1.9 kg, which ensures comfort when working.
• Suitable for drilling metal, concrete, wood, brick.
• There is a brush reverse and a drilling depth limiter.
• The updated design looks representative, so not only private craftsmen, but also professional teams buy such a unit.
• The manufacturer took care of safety by equipping the power button with a lock.
• Rich equipment. The case contains a depth gauge, an additional handle, grease for the drill, and instructions.

Flaws:

• The disadvantages include the fact that hammer drills are manufactured in China, although many believe that the presented model is assembled in Russia.

In the section on the question which manufacturer of power tools is more reliable: interskol, caliber or bison? given by the author Eurovision the best answer is I like Interskol.

Answer from Drinker in the thorn bush[guru]
interskol. The caliber was bought by the Chinese. bison - heard.

Answer from reed[guru]
I have an Interskol, a grinder hammer drill and a sharpener... I use it all the time, for these pennies it’s COMPLETELY normal.

Answer from Vereshchagin[guru]
The Interskolov saw has been working for about 5 years, the drill worked for a couple of years, then the switch went bad, replaced it and continues to work, but the company is not bad, I can’t say anything bad

Answer from Marriage[guru]
Almost everyone is the same

Answer from W[guru]
Interskol, although China, is more or less. Then comes Bison. In last place is Caliber.

Answer from Konstantin Medkov[guru]
Caliber weak batteries!!!

Answer from Sergey Nazarov[guru]
interskol is a noisy but powerful tool from a grinder to a jigsaw, the bison also keeps up with the workhorse I had a Zubrovsk drill as soon as I didn’t scoff at it, I remade so much work that I kneaded the PPC and mortar instead of a mixer and sawed, drilled and chiseled with a metal attachment, but like any tool it couldn’t stand it such torture and she died and the caliber is so-so naked China

Answer from Dmitry[guru]
All three are not manufacturers, but only trademarks of Chinese instruments. Different models of tools of the same brand can be produced by different manufacturers and have different quality.
From experience, such a tool is a household economy class “poor, but clean.” In general, they correspond to their price.

Answer from Anton Alekseev[newbie]
It depends: I would take the turbine from Interskol, and the trimmer from the caliber, monitor the prices here: drovosek-profi.ru and the quality for the same price is approximately the same for everyone