The design of a classroom is an integral part of a teacher’s work. Each teacher strives to give his corner individuality, to highlight his creative potential and talent as a designer.

Considering the meager budget and the monotony of templates, it is only possible to realize your idea creatively - by making cool corners with your own hands.

How to properly design a corner

First, you need to remember the uniform requirements for the design of corners in the classroom. We should also not forget about the differences in the presentation of information, its distinctive features in elementary school, middle and high school.

Here are a few basic requirements on how to decorate a cool corner with your own hands. This:

• aesthetics;
• creativity;
• reflection of the maximum number of areas of student interest;
• careful selection and preparation of information taking into account its relevance and significance;
• availability of educational information.

From the above, it is clear that the classroom corner should contain not just some pictures and articles, but necessary and useful information. Photos of self-made stands are presented later in this article.

Purpose of corner design

The classroom corner is designed to become an assistant for the teacher in organizing the educational process. To do this, the information posted on it must help achieve certain goals:

• maximum expansion of students' horizons;
• effective and high quality;
• improving the results of educational and extracurricular activities;
• development of creative inclinations, realization of the creative potential of students;
• class unity, fostering collectivism;
• formation of aesthetic taste of students.

How to make a cool corner with your own hands

The stand manufacturing process includes several successive stages:

• choice of topics;
• selecting the required sections, determining their total number;
• creating a sample of the future stand on paper;
• selection of materials for making a stand;
• work on making a corner;
• installation or installation of a stand;
• filling the classroom corner with information.

First you need to start creating a sample of the future stand on paper. You need to draw with colored pencils, felt-tip pens or paints what the cool corner will look like. Do-it-yourself decoration makes it possible to involve children in this process. Joint creativity will only bring students closer together, help to reveal their creative inclinations and will contribute to the development of aesthetic taste and imagination.

Selecting a topic

The choice of topic should be taken with full responsibility. In this case, you should be guided by the age characteristics of the children, their interests, wishes, and the size of the area on which the classroom corner will be located. Do-it-yourself design allows you to choose all kinds of themes and styles.

The theme of the corner can be related to fairy-tale characters, cartoon characters, and so on. The main condition is the brightness of the colors and ease of execution.

So, for example, you can decorate a corner in the form of a sun with rays, a train with carriages, a tree, a flower meadow, a rainbow, and the like. Here everything depends on the imagination of the teacher and his creative abilities.

The topics for the stand of middle and high school students are more strict. Do-it-yourself cool corners can be designed in the form of a book, mathematical, language, literary, sports or artistic symbols.

Students themselves can also suggest a topic for a stand, based on their preferences and interests. The main thing for the teacher here is to listen to everyone’s opinion and choose a topic that will be acceptable to the majority.

Selection of required materials

Having decided on the topic, it is necessary to count the total number of windows in which information will be posted, and also title each section in accordance with generally accepted requirements for what a classroom corner in a school should be. Decorating such a stand with your own hands gives room for imagination and creativity.

The choice of raw materials for making a stand depends on the state of the financial aspect and the potential of the teacher.

With a tight budget and a teacher’s great creative potential, you can make the perfect stand from simple materials at hand. Cardboard, plywood, fabric, and thick paper can be processed perfectly.

Below is one example of how you can decorate classroom corners with your own hands for an elementary school.

Class corner theme: "Family of ants"

The cool corner consists of three stands and is a forest clearing where ants are hard at work. Grass, flowers and other necessary decorations can be made from fabric. The tree and the anthill with its inhabitants are made of thick paper or cardboard.

On the central stand of the corner there is a large anthill. Above it you can attach a piece of paper with the inscription “Our friendly team” or “Our class”.

The number of ants should correspond to the total number of students in the class. You can display each student's photo on a corner display and mark the ant girls and boys with pink and blue ribbon respectively.

Also, student photographs can be designed in the form of a tree, the crown of which is formed by photographs with the addition of foliage. Leaves can also be made from paper or fabric. The composition is completed by a powerful trunk, cut out of cardboard or made of paper using appliqué or origami techniques. You can place a schedule of classes and bells under the tree.

On the second side stand you can make a “flower of success” with little tips for students and berries with mushrooms, on which you can place the names of the class attendants, children who do not have sick leave, etc.

In addition, space should be left on the stand to display educational information, birthday greetings, student achievements and recommendations for parents. A great incentive would be the presence of a block “Our creativity” or “Creative successes of students.”

In this case, you won’t have to waste your time and do absolutely everything yourself; it will be enough to just choose the right contractor, explain to him all the nuances of the order, then submit an application and, after a set period of time, pick up the completely finished product.

Installation or installation of a stand

If you have enough funds, you can order a stand from a specialized company that produces stands, both standard and custom-made.

The installation of a ready-made classroom corner can be carried out independently, with the involvement of the students’ parents, or by school employees or other organizations.

The main requirement when installing stands is unconditional compliance with safety regulations and compliance of the corner with all rules of safe operation. Stands must be firmly fixed to the wall, have no sharp corners and contain materials that could cause injury to children or harm their health.

Cool corner at school, decorated with your own hands

When filling a classroom corner with information, it is necessary to take into account all the requirements for data of this kind, as well as the age characteristics and interests of children.

It must also be remembered that messages on stands are subject to mandatory systematic updating. To implement this requirement, you can involve students by distributing responsibilities and assigning them their own section of the stand.

Responsibilities for updating educational information, class schedules, and data for parents rest entirely with the teacher.

The stand can contain not only drawings and texts, but also thematic photographs, which will make a homemade classroom corner at school quite original. Students themselves can submit photos for the stand, which will significantly increase the coefficient of their participation in the overall work.

Timely and high-quality updating, competent presentation of the text help maintain the interest of students and parents in the life of the class, and also significantly simplifies the teacher’s work, making it more effective and fruitful.

Compliance with all the above requirements is a guarantee of successful and high-quality work. Do-it-yourself cool corners will bring joy and satisfaction. There is no need to be afraid to create and fantasize, because the success of the business started depends on the abilities and talent of the teacher.

Instructions

It is most convenient to use information stands with a soft covering, to which sheets with advertisements are attached. Stands with A4 plastic pockets are becoming a thing of the past. The information that needs to be made public is not always placed on standard size sheets.

U stand there must be a name. It is placed in the center, closer to the top edge. You can use the standard ones: “Company news”, “Today in the company”, “Information”. Or come up with your own name that reflects the scope of the organization’s activities.

Divide the stand into two halves. On the one hand there will be daily work matters. On the other hand, there are holidays, congratulations and other news not related to the main work.

Then informational headings are attached to the stand: “Congratulations”, “Vacations”, “Best Employees”, etc. All news that is updated daily should be displayed in these titles.

If you need to post something very important, attach the heading “Urgent”. It is highlighted in red font and large letters.

When setting up your stand, try to avoid bureaucratic expressions. Write texts in simple, accessible language. Make sure that all employees, from the cleaning lady to the general manager, understand the content.

Draw up your holiday greetings with multi-colored pencils or beautiful postcards. Come up with wishes yourself, from the heart, without turning to the Internet for help. The creations that are posted on sites dedicated to congratulations often leave much to be desired.

Attach the “Wishes and Suggestions” pocket to the stand. This will establish feedback with the staff. Let the letters be anonymous, but with their help they will reveal information that will not be told at any meeting.

Approach the design process creatively, do not get hung up on template options. Let the information board become the pride of the company.

Video on the topic

Sources:

• Do-it-yourself group and reception room decoration in kindergarten

An information stand is an important part of the office interior of almost any company engaged in sales. And not just the office. You can order such a stand from professionals or make it yourself. To do this, we will need to get a piece of plastic according to the size of the stand, make pockets on it for leaflets and brochures, attach these pockets, write a title on the stand and insert it into the frame. Let's look at these points in more detail.

Instructions

With pockets the situation is more complicated. They can be made from plexiglass or PET plastic, but cutting them with a stationery knife will no longer be possible. In addition, the edge will need to be processed. And for some types of pockets, the material will also have to be bent. Here you will need to heat plexiglass or PET plastic using infrared radiation. The simplest and most proven way to heat these materials is to locally heat them from a nichrome string heated by an electric current. The material is heated due to heat exchange between it and the string, as well as through the absorption of IR radiation emanating from the string by the material.

The headline on the information stand is no longer written by hand. Letters with logos are often cut out of PVC film on a cutting plotter. If you don’t have a plotter at hand, you can cut out a stencil using scissors.

And the last thing is the frame. It should be done with a miter saw, because it is inconvenient to cut at an angle of 45 degrees with a hacksaw for metal. Although if your hands grow beyond what you need, you can get by with a simple file. After making the frame, it will be enough to insert it into it and hang it on the desired one. This is all.

Video on the topic

In every school stands play a very significant role in the educational process. After all, students see these images all the time, therefore, the information depicted on them should be understandable, interesting, and useful for schoolchildren. How to design stands so that they are valuable both from an aesthetic and educational point of view and also appeal to schoolchildren?

Instructions

If this stands where information on a specific subject will be presented, then ask a specialized teacher to prepare the necessary and, in his opinion, interesting information for the stands. The information should be useful to the teacher in the process of conducting classes, because stands are a kind of visual aid.

The main design of the stands will be inscriptions. Some of them can be prepared by professional artists. Please note that stands are designed with a view to many years of use, so it is important to think carefully about everything, so that both in terms of style and according to the information provided at the stands, they are modern and attractive.

At the stands dedicated to the relevant subjects, it is quite possible to provide space for a permanent mini-exhibition of students’ works.
Some information on the stands may change periodically. To do this, glue special “pockets” to the stands, which can be made from ordinary files. Paper with material will be inserted into them.

The information on stands should under no circumstances be monotonous. Try to come up with rubrics that will interest students. For example, these could be the headings “Interesting facts”, “Inexplicable, but true”, “A few numbers”. It would be nice if some of the information contained a little humor.

Please note that stands must be designed taking into account the students. Therefore, it is better to use waterproof paint, and choose a material for stands that makes washing and cleaning them as easy as possible.

Any teacher knows that design stand- this is an important and primary task. It can reflect the achievements in class results of educational and extracurricular activities, as well as plan further activities of the class team. But how can it be designed to be informational, colorful, and entertaining?

Instructions

Create a stand together with your students. Get them used to creating together. This will unite your team even more. Distribute the work: who will be responsible for collecting the material, and who will formalize it. Also decide who will prepare entertaining questions for the quiz.

Of course, there should be a performance from a great team at the stand. This can be done by pasting photographs of children and signing them.

Display the life of the team. List the events carried out: with a veteran, holding a class hour for, reviewing the formation of bearings and songs, etc. If you received certificates or thanks for active participation, be sure to place them on the stand. It is also advisable to attach photographs from these events.

Post a list with class themes. You can also prepare questions or entertaining tasks for them.

It is imperative to post lists of birthday people and congratulations with wishes. Some of your classmates who write poetry can write a congratulation in poetic form.

Plan also a section for parents, because the class team consists of children, teacher and parents. In addition, this will allow you to build good relationships. Post there the information they need: recommendations and class teacher, addresses of organizations and, for example, for obtaining a ticket to the camp.

Information on the stand should be updated regularly.

In recent years, more and more enterprises and companies are taking part in thematic and specialized exhibitions. For successful work at the exhibition, it is necessary to properly design and fill the exhibition stand. How to do this competently, efficiently and attractively?

Instructions

Calculate and think over the space of your stand. Distribute the space in such a way that visitors have free access to the exhibition and can easily familiarize themselves with the contents of the stand.

Carefully consider the arrangement of exhibits. For these purposes, it is recommended to conditionally divide all elements of the exhibition into three - main, additional and new items. It should be taken into account that the most advantageous places at the stand, in terms of access to visitors, must be given to new products. The main exhibits should follow. Additional objects can be placed in the depths of the stand. It should be remembered that the exposition should occupy less than half of the total area of ​​the stand.

Place text on the stand about ongoing promotions, exhibits and available handouts. This information should be extremely concise, meaningful and located in such a way that it can be easily seen.

Design a lighting system for the exhibition structure. It should be taken into account that the main exhibits of the stand should stand out visually. Position the lighting fixtures so that bright light does not shine on

Master class on making an information stand at school

3. Cultivate patriotic, aesthetic feelings, pride in one’s country.
Materials and equipment: thick cardboard, glue, tape, scissors, ruler, pencil, self-adhesive paper, A 3 paper, self-tapping screws, screwdriver, rope, photo corners.

Progress

We cut out 7 rectangles from cardboard, 37 cm wide and 50 cm long. I cut them out of cardboard boxes (I asked for them at a toy store). We cover these rectangles with self-adhesive paper.

If everything is satisfactory, we glue it with Moment glue for strength.

The main task of the information stand is to familiarize the general public with any information. At an enterprise this could be orders and instructions, at a store it could be information for customers, and at school it could be a schedule of subjects. Depending on how much information will be on the stand, its size is determined. In order for the stand to fit organically into your announcement corner, you need to choose the right stand on the website http://vs-smol.ru/stendy-tablichki.htm. If you have the opportunity and desire, you can make it yourself and our material will help you with this.

Necessary materials

Everything you need for manufacturing can be found in the office or at home after the next renovation:

• plywood;
• PVC sheet of the color you need;
• plexiglass or polyethylene film up to 1 mm thick;
• any glue suitable for PVC and plastic;
• metal ruler;
• a simple pencil;
• hacksaw for metal.

Base manufacturing process

First of all, you need to decide on the size of the stand to be made. To prevent it from being too small or too large, think about what information you want to place on it and how to optimally use this space. For a small company, a stand with 4 to 6 A4 size sheets arranged in two rows may be sufficient. Between the sheets, for a more aesthetic appearance and better perception of information, it is necessary to leave a gap of 20 - 30 mm. Don’t forget about the header of the information stand, which will “invite” people. For this, a space of approximately 100 mm wide must be left on top of the sheet.

When the dimensions are determined, you can begin marking using a metal ruler. We use a sheet of plywood or plastic as a base for the stand. When marking, do not forget about the corners. We control rectangularity using a square or measuring diagonals, the distance between which should be the same size. Having made sure that the markings are correct, we cut out the base along the intended contour.

The resulting workpiece must be given an aesthetic appearance. To do this, paint it in any suitable color. Using plastic in this regard is more profitable - it is already factory painted, and you can save time on this procedure.

Making pockets

The pocket is the main part of the stand, where the information itself will be located. There are several options for making stand pockets.

The most inexpensive and common is to use an ordinary office file for documents. Using glue or double-sided tape, it is glued to the base and the pocket for insertion is ready.

But if you want your information stand to have a more presentable appearance, then you need to put in a little effort. We will use transparent plexiglass as the material. We draw the outline of the pocket onto the sheet, which should be 10 - 15 mm larger than a standard A4 sheet and cut it out using a hacksaw. To make it easier to insert and remove paper, we cut off the corner of the pocket on one side.

From the same plastic we cut out strips of length equal to the size of the pocket and 5 mm wide. We glue them along the edges of the pocket, except for the top side, and then, in the designated places, to the stand. These strips will allow you to lift the plexiglass.

In the same way, you can make pockets from polyethylene film 0.7-1 mm thick, only they will be attached to the stand using double-sided tape.

The heading for the header of the information stand can be made using a stencil or letters cut out of colored plastic. You can also resort to large format printing services. Remember that the title is the business card of your stand and the more imagination you show, the more attractive your stand will look.

That's all - the information stand is ready, all that remains is to find a suitable place for it.

I decided to somehow make a couple of rotating stands, like in the photo. Typically these are used for hanging satin ribbons on reels. Height 220 cm, width 50 cm - so the thing is not small.

The stand must be rotating. I had to rack my brains a little. It was necessary to select a pipe, bearing and washer in such a way that together they would form a rotating unit (the design of the rotating unit itself will be presented later). At the beginning I thought that I could simply match them to each other “locally,” but very soon I realized the depravity of this path and went to study literature.

After considering different combinations, I chose the best option:

From "GOST 3262-75. Steel water and gas pipes." I chose a pipe - a “magpie” with an outer diameter of 48.

The frame of the stand is made from a 25x25x1.5 profile pipe. Pipe legs 20x40x2. Crossbars made of 7 mm rod.

From "GOST 7872-89. Single and double thrust ball bearings." I chose 8210 series bearings with an internal diameter of 50.

In "GOST 11371-78. Washers." I found d48 washers with accuracy class A and an internal diameter of 50.

But if there are no problems with the pipe and bearings, then M48 washers of class A accuracy are not a very popular product. Couldn't find any of these for sale.
I found Business Center Leirus LLC on the Internet, located in my city, which listed these washers in the price list on its website. I called the number provided, but their managers are strange. It was not possible to find out what the minimum order is, how many pieces are in a package, what the price is per package and what the delivery time is. I'm not even talking about what accuracy class their washers belong to according to GOST 11371-78.

I solved the problem with the washers simply - I turned to a turner, who turned them for 70 rubles apiece.

Unfortunately, I don't have pipe clamps. But it is important to accurately set the angles and distances between the frame elements. To do this, I cut out a template from plywood with the required dimensions and exact angles and simply fixed the profile pipes on it using clamps.

And there is no frame for the grinder yet either. Therefore, the cutting of parts is not always ideal.

But after welding everything falls into place. I cooked with Monolith 2 mm electrodes. Current 50 A with separation.

Thanks to a simple template, we managed to get good results

We clean the seams with a grinder.

Using the same template, I set up the vertical posts of the frame. It turned out not perfect, but acceptable.

One of the elements of the rotating mechanism is a washer, which is located in the lower part of the frame and which rests on a bearing. It is attached to four sections, which must be welded quite accurately. To do this, we first weld the first crossbar at the bottom of the frame.

Now we weld on the second crossbar

And having made the same cuts, we place the washer in the center

We fix the washer by welding.

At the top of the frame there is another crossbar with a piece of pipe welded perpendicular to it. This piece of pipe will also become an element of the rotating frame in the future.
Part of the future stand is ready. Let's call this part “Rotor”, because this is what will rotate.

Adjustable feet will be welded into the ends of the legs. I drilled the appropriate holes for them.

I made another template from the same plywood. It fixes the position of the legs relative to the bottom edge of the post and the angle of inclination of the legs.

It also fixes the position of the leg relative to the axis of the column.

Using a square, I set the position of the legs relative to each other

After work, the template was slightly charred in the weld areas, but still quite usable.

I welded a washer onto the stator at the bottom. The thrust bearing will rest on this washer, and the rotor washer will rest on it.

At the top of the stand, it was necessary to insert some kind of bushing into the pipe so that the thinner pipe could rotate freely in it. At the same time, I don’t have a lathe either. I had to rack my brains a little more.
As a result, to make the bushing I took a plastic coupling for 32 mm polyethylene pipes. It fits perfectly into the sorokovka water and gas pipe. The connection is tight, but can be disassembled by hand.

Using a drilling machine, I adjusted the inner diameter of the sleeve. Just in case, to prevent the plastic from melting and damaging the forstner drill, I set the machine to minimum speed - everything went smoothly.

I sawed off the excess parts with a hacksaw and that’s it - the bushing is ready

The rotating mechanism works perfectly - nothing hangs out, does not creak, works smoothly. This can be clearly seen in the video:

Now we need to make it all look presentable. The first step is to remove the rust.

Before painting, protect the adjustable legs and their threads from paint.

And finally, we paint. It was real torture. The fact is that parts of the stands took up all the space in the workshop. They had to be painted in parts and rearranged all the time, because it was impossible to approach them from all sides. As a result, in some places the fresh coating was damaged by an accidental touch, either with an elbow, or with the back, or with something else. The ubiquitous dust also added to the inconvenience.
Therefore, we had to expand the workshop a little and create another room for painting. More about this here:
Now painting work does not cause too many problems and does not take too much time.

Some difficulties arose when painting the crossbars. They are made from 7 mm rod. At the beginning, the strategy was as follows: lay them out on a plane, apply paint with a spray gun, and let them dry. Then turn them over on the other side and apply paint again with a spray gun. The third time, the rods should be painted on all sides. So it was in theory.

But in practice, the bars could not be turned to the other side. Because they are curved and this curvature always tends to take a lower position. Having applied the second layer and seeing that I was painting almost the same side, I decided to paint the rods by hand. Oh, what a tedious job this is! Two coats took almost two full working days.

It was no less tedious to install almost five hundred rod holders, screwing almost a thousand self-tapping screws with a drill into them. By the way, it was not easy to buy them. I had to wander around looking for the required number of identical rod holders.

After installing the rod holders on the frame, we perform the final assembly of the stands. At the bottom, the rotating mechanism consists of two washers separated by a bearing. This unit holds the entire vertical load.

At the top, the rotating mechanism consists of two pipes inserted into one another and separated by a plastic sleeve. This node holds lateral loads.

All that remains is to cut the crossbars

And install them in the rod holders

The rotating stands are almost ready.

One more detail remains. At the top of the stand there is a box, which is put on top and logos are applied to the walls. I decided to make it from 18 mm plywood, although Gamma, which served as a prototype, makes it from tin.

At the top of the box on the inside there is a protrusion with which it is held on the stand frame.

I painted the boxes in my new painter, the link to which is above in this article.
The first layer on wood always looks disgusting - bald spots, raised pile and other joys of a painter.
Therefore, I usually put two layers (and sometimes more) with intermediate sanding of the coating with an abrasive sponge. The first primer layer can be diluted more strongly with a solvent so that it is absorbed deeper into the wood.

The second layer goes on much better

The stands turned out wonderful. In some places even better than the prototype. In general, there is joy from a job well done))