Besides the obvious attractiveness and charisma Robert Downey Jr. as a genius billionaire turned superhero - Tony Stark- the Marvel film has created a big temptation to find out what kind of toys and devices are built into the latest version of his high-tech suit. And while innovations like a suit that unfolds from a suitcase directly onto your body, or clothes that always follow you when you wear special bracelets, remain in the realm of science fiction, there is still hope. Most of what's built into the suit " Iron Man"has analogues in our world, albeit not as chic as in the film.

With a strength-enhancing exoskeleton and jet beams, as well as a robot assistant, becoming a real Tony Stark will be quite difficult - and certainly not cheap - but not impossible, by any means.

Despite how cool Tony's toys are, without a power source they will remain just beautiful armor. You need to connect a small arc reactor based on cold thermonuclear fusion.

Fusion reactor technology is the core of Stark Industries' business and the Iron Man suit. There are no analogues of this technology in our world yet (although). Marvel.com suggests that the comicsoid reactor's technology is rooted in the Tokamak, an experimental Cold War fusion reactor developed in the USSR. Like the arc reactor, the tokamak is made in the form of a toroid, includes plasma, magnetic fields and generates huge amounts of energy.

The tokamak is much larger than the arc reactor - even larger than the prototype at Stark Industries - and has not yet moved beyond the experimental scope. But given Tony’s genius in miniaturizing complex structures, most likely the basis of a fantastic thermonuclear reactor is the tokamak.

According to Neil DeGrasse Tyson, the problem of designing a fist-sized energy source is not so much generation as storage and potential. side effects. For better performance and minimal burns, DeGrasse Tyson recommends a different type of power source: one that might be based on the controlled annihilation of matter and antimatter. , For example.

Jet gloves

The Jet Beam Gauntlet is one of Tony Stark's most used weapons, but it's unlikely to be recreated with high fidelity in the real world. Of course, this option is not suitable for avid Iron Man fans. One of them, the German Patrick Preib, during one of his breaks in his work (on polymer processing) made something similar to a reactive glove: a laser built into the hand.

A laser powered by lithium-ion batteries may not have the same destructive power as Iron Man's gloves, but it can cause harm. It emits a 1000 mW beam, which is 200 times stronger than the laser beam that is legal for use in most countries. In short, if you want to fry your cat, he may well catch fire.

Not satisfied with the work done, Priebe went further and created what he called "", complete with a retractable laser.

According to the legend of Iron Man, the hero can fly thanks to powerful jets of energy emanating from the feet of his shoes. They move him through the air, without the risk of his feet spontaneously combusting and without having to wear high heels, which would make the hero look like a representative of glam rock. However, in our world there are no jet boots that will help you take off, but there is something else: a personal jetpack. Jetpack.

Personal jetpacks have been around for a long time. The first model appeared in 1919 in Russia, its creator was the inventor Alexander Fedorovich Andreev, but only in 1960 the first jetpack was presented to the public. Unfortunately, the high cost and short flight time meant that the hype around the invention would quickly fade.

But the dream lives on. New Zealand company Martin Aircraft has developed the Martin Jetpack, a gasoline-powered personal jetpack that can stay in the air for up to 30 minutes at a time. It is intended for the consumer market. According to some estimates, its price is about $1 million, and this is the minimum. But no one argues that all initiatives come at a cost to the real Tony Stark.

DARPA (American Defense Advanced Defense Agency) research projects) has been working on exoskeletons that could improve the physical combat performance of American soldiers for more than ten years. In 2010, defense contractor Raytheon presented one of the results of its developments for the first time: the XOS 2 exoskeleton.

The suit is designed for work in the field of logistics, that is, logistics, significantly increases the wearer's strength, allowing him to easily break through a three-inch layer of wood. Built-in hydraulics work independently of the suit's owner's muscles, thereby giving him the ability to work for three. Lightweight materials and design provide maneuverability that massive military equipment cannot boast of.

There is, of course, a problem. Each suit must be plugged into an outlet and also linked to the central control panel. While tethered suits are slated for release in 2015, Raytheon is currently developing untethered suits for future use.

Exoskeletons are not only used in military environments, of course. Outside the theater of war, the same technologies can help people relearn how to walk and gain extra muscle. In fact, it was Ekso Bionics, one of the leaders in the development of medical exoskeletons, that shared its technology with Lockheed Martin for military purposes, not the other way around.

Just like the military exoskeleton, medical devices are designed to help the body with the goal of adding strength, in addition, they will help the muscles retrain and strengthen them in the process. They may not be able to lift a row of wooden beams or a rocket, for example, but thanks to exoskeletons, people who cannot walk or do not have such a precious opportunity will have it.

Computers controlled by the power of thought

If the fact that Tony Stark controls an entire suit of high-tech armor with his mind seems completely impossible to you, how surprised you will be to know that technology already exists with which you can control a computer system with just the power of your mind.

In the laboratory for the development of advanced technologies, together with Ruzbeh Jafari, an assistant professor in the department of electrical engineering at the University of Texas, an experimental system has been developed that allows you to control, for example, a tablet Samsung Galaxy no touch or voice commands. Everything is built on where you look and what you focus on.

It must be admitted that technology has not yet reached the stage where it is possible to write a simple message using this method, let alone control a complex military machine. For now, the user's choice is limited to a meager menu. But this is just the beginning.

Holographic display

While watching the movie, in the scenes showing Tony Stark inside the armor, we see screens pop up in front of him, giving him the information he needs. It looks great. Why don't we have this? In fact, everything will happen, and very soon.

In fact, the point is not in glasses that can take photographs, thereby bringing Google Glass closer to Iron Man technology, but in the very concept of a wearable computer connected to the Internet that can respond to voice commands and display information accessible only to the wearer. Obviously, miniature glasses for Instagram lovers are the first step towards a full-fledged helmet that will help fight crime.

J.A.R.V.I.S.

Smart homes are a tempting idea for science fiction lovers. However, with advances in wireless networking, data analytics, and systems like J.A.R.V.I.S. are rapidly approaching scientific reality.

According to Diana Cook of the University of Washington's School of Computer Science and Electrical Engineering, the key to smart homes will be ubiquitous intelligence, capable of searching and interpreting information and acting autonomously according to algorithms. Some of these systems are already running in your home. Air conditioners can automatically adjust the temperature, refrigerators can automatically defrost. And so on.

Although "Jarvis" is an assistant in Stark's lab, Cook's research into smart homes is focused elsewhere: she's exploring how fluid intelligence could help retirees live longer without involving outsiders.

If you're still a fan of Tony Stark's technology, we suggest you take a break from the movie and head straight to the comics. One version of the iron suit features rollers that extend from the bottom of the armored suit.

This begs the question: While the film's technological push resulted in elements of exorbitant power, why not equip your iron suit with roller skates?

Unfortunately, science still does not give a clear answer to the question of how to find a reasonable and attractive secretary who will be infinitely devoted to her boss.

All children love to transform into fairy-tale heroes. They play their first acting roles already in kindergarten. Of course, every girl’s dream is to become a wonderful princess, and every boy’s dream is to become a brave knight. But if to transform the baby it is enough to buy a beautiful and long dress, then in order to “equip” a warrior for battle, you will need a special suit and accessories. The first and, perhaps, the main attribute of all knightly uniforms is the headdress. So, do you want to make your little boy an original carnival costume with a modern twist? Then check out one of the many ways to make an iron man helmet. The instructions are given in the form step by step guide with comments.

What and how to make an iron man helmet: preparation

Before you get started, you need to decide on a few things:

• for what purpose is it planned to make the headdress;
• what the future product will look like;
• what will be its technological and functional characteristics.

If you plan to make part of a costume, for example, for a New Year's party, you should not complicate the work too much. It also makes sense to simplify the functionality of the helmet and its manufacturing technology as much as possible. In the case of designing this main component of a superhero costume (photo 1) for participation, say, in an exhibition of works by high school students, a completely different approach is needed. It will be of particular importance here appearance, and its manufacturability. This instruction: “How to make an iron man helmet” is presented as a description of the initial stages. Plan further work depending on the required result, using different raw materials and technology.

Necessary materials

To make a pattern, use fairly thick landscape paper or whatman paper. Draw the lines with a simple pencil. For cutting, you will need a stationery knife, regular scissors and small ones, such as manicure scissors (for neatly decorating corners and recesses). For a simplified version of the helmet, use corrugated cardboard (store box from products, cosmetics, etc.). Connect all parts with durable and quick-drying glue (Moment type) manually or using a special gun. For external decoration (coating parts and fastening them), you will need adhesive tape of various colors. The development of an iron man helmet can also be made of less dense material. This option is used if you plan to plaster the parts and then connect them to each other, for example, with magnets.

Assembling the template

Photo 2 shows drawings of an iron man helmet. When connected, the pattern pieces will be located on the following parts of the head:

1. Ear.
2. Parietal.
3. Rear.
4. Chinobuccal.
5. Nasal.
6. Frontal.

Knowing this condition, the parts cut out of paper will be easy to assemble into a single product. Photo 1 of the finished helmet will help to distinguish the parts, since almost all zones are painted differently and have clear connecting boundaries with each other. But still, before joining the product into a single whole, place the parts in a wide space and mark the gluing points.

We make an iron man helmet from paper or cardboard

To make this headdress voluminous, you need to skillfully design the connecting joints. To do this, especially in places where curved lines are made, make small cuts that will help give them a convex shape when gluing. Photo 3 clearly demonstrates this stage of work. After assembling all the parts together, cover with tape. different colors. You can also use colored paper for decoration, which then needs to be covered with transparent adhesive tape. Give your child the opportunity to use their imagination by creating a creative creation on a modern theme.

Application of complex technologies

Photo 4 shows how to make an iron man helmet from thick paper (whatman paper). If you cover the top of the assembled product with a thin layer of gypsum mixture and let it dry, you can get blanks for a more technologically advanced model. In this case, during the work process you need to think about how all the removable or sliding parts will be connected to each other. The simplest and most suitable option for this technology is the use of magnets fixed inside. You can also install rotating joints in the cheek and chin areas to make the front parts movable. Externally, such a modern helmet can turn out to be especially attractive due to the use of a special luminous emulsion when painting. Well, the final stage of the work will be to install mini-bulbs inside the craft in the frontal area to illuminate the eye recesses. That's it, the helmet is ready!

This original craft can serve as the basis for creating similar headdresses of other fairy-tale characters. Create by making your most unusual fantasies come true!

Well, fellow papercrafters, it’s time to make an Iron Man Suit with your own hands.

By popular demand, we are posting the iron man suit mark 6. I don’t know why, but we decided to start with this model, so get ready for a long and exciting quest to put all the parts together. First of all, we buy a pack of valerian, scalpels there, that’s all, and read further about that how to make an iron man suit with your own hands.

Well, first of all we need an Iron Man Mark VI helmet. I am attaching the actual layout (drawings). Occupies 14 pages in pepakura. Well, actually, we assemble it like a regular helmet. Even a couple of spacers are included.

Iron Man Helmet Mark 6 -

What in our DIY iron man suit comes with the helmet? That's right Neck! It takes up 7 pages in papakura, it’s not difficult to put together, as always, you’ll have to struggle a little with tricks.

Next we will start working on the chest of the stomach. Here you should measure your chest, or rather your ribs, and compare them with this scan. This ZhCh chest model is made for the average adult papercrafter. The girth of the ribs in this drawing is 32 cm at its most bottleneck, on average 35. Perhaps you are starving or, conversely, a renowned bodybuilder, so it is better to play it safe.

Oh yes, I almost forgot about the collar from the iron man suit. Two pages and easy to assemble.

This time the Iron Man suit will have forearms. Contrary to what some might expect, the forearm is located between the biceps and the hand. This useful part takes up 10 pages in pepakura. Easy to assemble. Requires mirroring.

And finally, the last part of the hand is the actual palm and fingers of the iron man made of paper. Judging by the development of the hand, there is a hint of the first difficulties here, although it may only seem so.

So, our DIY Iron Man suit is slowly starting to take shape. Now it's time for the abs, or belly, which makes us a little sad, because it takes up a whole 25 pages, a lot of ends.

The time has come for the intimate part - the panties. These, of course, are not panties, but a codpiece, but whoever likes it more. The trouser takes up 8 pages in pepakura and is easy to assemble.

Well, we’ve come to the feet of our iron man suit. Our hero's thigh is located on 15 pages. Don't forget to mirror.

Well, the shin has arrived. It also spans 21 pages, has both a left and a right part. A couple of spacers are included.

Well, we have come to the end of our miracle costume. Foot fellow papercrafters, foot...

This part of the Iron Man suit is attached between the forearm and palm. Some call it the carpal plate. But the main thing is that you understand where it should find its refuge.

Well, that seems to be all. There's nothing to do here. I sincerely wish you good luck, because it will be useful to you if you decide to bring all this to fruition. Something like this should happen after gluing the paper model together. True, it's a different brand.

The briefing is over. A short anatomy lesson is given. Start gluing! GOOD LUCK!

The theme of superheroes is always popular with children. The boys take great pleasure in trying on the costumes of the most famous characters. Of course, many stores offer to purchase the appropriate outfit at various prices. Particularly popular is the comic book character and three wonderful films - Iron Man. It is his armor that almost every boy wants to try on. But on the shelves there are typical carnival costumes, but I want something realistic. Then the question arises for every parent: how to make an Iron Man suit?

Iron Man Suit: The Beginning

If you decide to make a wonderful costume of your favorite character for a child with your own hands, then first be patient. This work will require a lot of time and perseverance from you. Before making an iron man suit, it is necessary to study the real character in detail. View photos of the movie character and flip through the comics. This will allow you to compose big picture future outfit. Of course, it will be impossible to create real Iron Man suits, but every parent can make an imitation.

After a detailed review of the necessary drawings, draw up approximate diagram all the main details of the costume. You can use the provided drawing. But before that, do not be lazy to measure all the main dimensions of your child: head circumference, height, arm length, waist and pelvis circumference.

DIY Iron Man: material for a suit

Making an Iron Man suit with your own hands is quite a difficult task, but it can be done. After the introductory part with the character, you need to decide on the material from which the superhero outfit will be made. There may be several options:

Let's get started: Iron Man helmet

It's better to use Iron Man suit plans tailored to your son's size. Otherwise, the child will feel uncomfortable and quickly tear his outfit. Study the presented diagram in detail and increase it in proportion to the actual height and girth of body parts. The easiest way to make Iron Man is from thick paper (160 g/m2). It's better to start with the helmet. This way you will gain the necessary skills, and it will be easier to remake it.

We cut out each part separately with an indentation of about one centimeter from the edge. After we glue the parts together, it is better to do fittings at each stage. This is the only way you can perfectly fit your product to the required dimensions person.

Hero Corps

The back and chest are done separately. Again it is necessary to make detailed drawing. Don't forget to measure your chest volume. All fans know that a specific lantern glows in the middle of the superhero’s chest. It can be imitated using a basic night light of the appropriate diameter. Just walk through the hardware store and you will definitely find the necessary decorative element. Or use foil, which will simply shimmer beautifully.

In fact, it all depends only on your creative ingenuity. No established rules, how to make an Iron Man suit.

Arms and legs

The arms and legs are the most mobile parts of any suit's body. It is necessary to make gaps or special transitions at the bend points. Keep in mind that children are very mobile and their movements should not be hampered. You can simply make shields and gloves.

For footwear, it is better to choose sneakers or sneakers. Apply red paint from a spray can. Next, take a brush and draw the corresponding lines. You can also make only shin guards for your calves.

The key point is rigidity

Now you know how to make an Iron Man suit. After this, the structure must be made more rigid. To do this, purchase epoxy glue. Using a wide brush, apply adhesive to all parts and wait for complete drying. It is better to leave the product for a day to air and dry completely, only after that we apply paint and other decorative elements.

Be prepared right away that the process will take several days. You want to create a high-quality costume for your child, and not just dress him up in a box from household appliances. Don't confuse the robot with Iron Man. If in doubt about the availability of any parts, consult your son. He knows everything about his favorite character.

If you still don’t have a good idea of ​​what Iron Man looks like, pictures of the costumes will help you finally figure it out.

You are not the first person who will try himself as a designer of a famous costume.

Many craftsmen were able to create very realistic outfits for themselves and their children. This means that you too can please your child. Just stock up on desire and patience. Your child’s satisfied smile will be an excellent reward for her titanic work and diligence.

For parents, preparing for the holidays in which their child participates necessarily includes making or purchasing a character costume in which the child will appear. Recently, various superheroes or people with supernatural powers. One of the most beloved images by boys is Iron Man, a multifunctional robot controlled by Tony Stark (his creator), who saves the world from evil.

Iron Man suits can be very diverse and have many variations, because unfortunately, it will not be possible to create a real suit that makes its owner invulnerable and even gives the ability to fly. But you can make your own hero costume from simple materials. Of what? Yes, there are simply a lot of variations: from paper, cardboard, sewn from fabric, made from aluminum or other metal, cast from plastic, etc.

Main components of the costume

If you decide to make a costume for this character, you will find that there are many models and variations of it, so choose the option that you like best. The most popular and spectacular model is Iron Man Mark VII.

A children's costume should be light and safe, so you should not connect electronics to it to recreate glowing eyes or other elements of the hero's image. It is better to make a costume for your child using the papercrafting technique. It will allow you to create an image using paper, cardboard and gluing using special technologies.

To make a product, you will need diagrams or drawings. There are quite a few of them already. By installing Pepakura Designer 3 or Pepakura Viewer, you can unpack files in *.pdo format. Then you can edit them, set your own sizes, etc. The diagrams can be redrawn or printed using a printer. Then assemble and paint. This way you will get an almost real costume with your own hands.

• Link to the program Pepakura Viewer: http://www.tamasoft.co.jp/pepakura-en/download/viewer/index.html
• Iron Man Patterns can be downloaded here: http://pepakura.ru/razvertki/bronya/kostyum-zheleznogo-cheloveka.html

Manufacturing process: what needs to be prepared and how to assemble the parts?

After printing out the drawings, take your child’s measurements and make the necessary changes to the diagrams - this is how you will have your own children's version suit. Then print it again, but with the required dimensions.

Paper for making a suit must be taken with a density of at least 160 g/m2. Experienced cosplayers advise taking not even cardboard, but very thick Whatman paper. You will also need:

• a good sharp cutter or utility knife;
• special cutting mat;
• awl;
• glue and glue gun;
• scissors;
• epoxy resin (rubber gloves and a respirator are also needed when working with resins);
• acrylic paints (red and gold);
• transparent plastic;
• sandpaper.

So, start making your own costume.

• The helmet is made first. To do this, print out the helmet drawings and cut out all the details. Then carefully start gluing them together (assemble them like a regular helmet). All elements are marked with numbers, so you need to carefully glue them together (the back of the mask, which will be removed, does not need to be glued).

• After you have finished making the helmet, you will need to coat it with a special two-component glue (epoxy - resin plus hardener). Secure all elements of the helmet with reverse side using regular office clips and cover it with glue. Maintain the correct proportion so that the product then dries and is suitable for use. Some people use polyester resin rather than epoxy, but it has a very strong and toxic odor and takes a long time to dry.

• Then reinforce the inside of the helmet with fiberglass (cut the material into small strips and glue it in several layers inside the product) and coat it again with epoxy glue on both sides. When everything is dry, sand the helmet until it looks like a cast one.

• Then the product must be painted. Since you need to use two colors, you will have to cover with tape those places where it is supposed to be painted with a different color (paint it red, leave those areas where it should be gold and vice versa).

• You will have to do the back part separately (do the same thing - cover with glue, secure with fiberglass, sand, paint). The ears on paper are just round, but you can make them out of wood and then glue them to the helmet. To make the helmet take off and put on, you can use magnets or a simple manual mechanism(option with Velcro is also possible).

• In the same way, collect the neck, chest, back, shoulders, arms, legs and other parts of Iron Man's body. Try it on regularly to make sure the sizing is correct. When painting, be sure to ensure that no gaps or gaps appear.
• When making the general assembly of parts, give them mobility. A glue gun will be very useful for this, and you will also need elastic bands (mostly wide ones, and narrow ones for the hands) and plastic snap hooks for large parts.

• If you have the desire and opportunity, you can make luminous elements. To make Iron Man's chest glow, glue a battery-powered LED night light into it, and you can use a flashlight for the hands (just saw off the unnecessary part so that it can be easily integrated). If you place a mouse button on the side of your index finger, the wearer of the suit can easily turn on the glow whenever he wants.
• The eyes are made using LED lights. You will also need a switch, batteries and wires. Cut two pieces of clear plastic in the shape of the eyes and place the lights just below the eye holes.

Video master class

Iron Man mask, step by step work. Patterns here: http://goo.gl/pJFr6C

A slightly simpler option is to create a papier-mâché mask using the same principle, and cut the costume itself and sew it from fabric (yellow or golden turtleneck/jacket and pants, and the rest of the details are red: vest, panties, gloves, knee socks, shoes) . Relief can be given to some parts of the body using foam rubber.

If your child dreams of being a real superhero, help him make his dream come true and create a miracle for him in the form of a costume of his favorite character. Or make a cool costume for yourself :)

Iron Man Reactor