Radio-controlled cars have become one of the most popular toys for children and adults. They differ modern design, excellent technical characteristics, rich functionality and much more, which makes them popular among people of different ages and genders. Regardless of the manufacturer, the level of equipment and the strength of the materials used, any radio-controlled toy sooner or later fails and then the help of a qualified specialist is required.

What causes breakdowns?

Breakdowns can appear for various reasons, most often these are:

• Manufacturing defects;
• Inaccuracy of the driver;
• Mechanical damage during check-in;
• Wear of elements.

A factory defect can come to light even after several months of using the toy. In this case, warranty service will help, which involves the elimination of any breakdown completely free of charge, if the reason is not the negative actions of the user aimed at causing mechanical damage.

Sometimes the breakdown is not such, the battery may simply run out or it is time to change the batteries in the remote control. In this case, our experts advise, first of all, to pay attention to these two points in order to make sure of the need for a qualified intervention. Inaccuracy of the user can also cause a breakdown. If you accidentally cut the wires, remove the radio-controlled car, then when it starts it may not respond to the control panel. Such mechanical damage may occur unintentionally during a check-in. A full speed collision with another participant or an obstacle results in strong shaking of the internal components. They may not be damaged, but they will be the main reason why the car will no longer start.

If the car has been used for a long time, its main components will wear out. This is the case with a real car, in the operating instructions for which the manufacturer indicates how many kilometers the resource of certain parts is calculated. A radio-controlled car also requires attention and timely maintenance.

What breakdowns do you encounter most often:

Our repair service radio-controlled cars has extensive experience in troubleshooting a wide variety of problems. You can determine whether a toy needs professional repair or whether you can cope with the breakdown on your own by the nature of the malfunction.

You should definitely go to the masters of our service if:

• The battery does not store a charge;
• The buttons on the remote control have broken;
• Disconnection of wires is noticeable;
• There is a foreign smell after the last race;
• The motor does not respond to the remote control;
• The car does not listen to the user on the track.

In fact, there are a lot of breakdowns, independent disassembly of the machine can cause even more serious problems, therefore, in search of saving your own time and money, we advise you to immediately come to our specialists. Diagnostics is carried out within fifteen minutes and it is completely free, but at the same time it guarantees one hundred percent restoration of the performance of your radio-controlled toy.

In the Service Center Young Papa we provide the following types of repair of radio-controlled cars:

For machines with an electric motor:

1. Replacing the collector motor. Replacing the collector motor. Setting the gap between the spurm and the pinion, connecting the wires to the regulator.
2. Replacing the brushless motor. Replacing the brushless electric motor. Setting the gap between the spurm and the pignon, connecting the wires to the regulator.
3. Replacing the collector speed regulator. Replacing the collector speed regulator. Connect the wire to the motor and the receiver. Gluing the regulator and setting.
4. Replacing the brushless speed governor. Replacing the brushless speed governor. Connect the wire to the motor and the receiver. Gluing the regulator and setting.
5. Replacing the belt on a road model. Replacing the belt on a road model. Dismantling the model unit, loosening the belt tensioner, and then adjusting the tensioner after replacing the belt.
6. Replacing the spur (driven gear). Removing the gear and slipper device. Cleaning the sleeper, assembling the sleeper and installing the unit on the model with adjustment of the sleeper's work force.
7. Unit fault detection. If, in order to determine the malfunction of the internal node of the model, it is necessary to disassemble part of the model to access the node (for example, a differential).
8. Fault detection of mechanics. Determination of wear on bearings, gears, cardan bones and differential cups.
9. Fault detection of collector electronics. Paid fault detection of collector electronics. Alternating connection of our electronics to detect a burnt out node
10. Fault detection of brushless electronics. Paid fault detection of brushless electronics. Alternating connection of our electronics to identify a burnt out node.

For cars with internal combustion engines:

1. Engine break-in internal combustion(model preparation and servo trimming). Running in an internal combustion engine (preparing a model for running in and subsequent operation and trimming servos), installing an antenna, installing a battery or on-board batteries and installing an air filter.
2. Internal combustion engine tuning. The internal combustion engine is tuned during and after running-in. The carburetor needles are adjusted in all engine operating modes.
3. Replacing the nitro engine. Removal and engine installation. Setting the gap between the spurm and the pignon, fastening the muffler and the gas pump.
4. Replacing the clutch bell. Removing the engine of the internal combustion engine. Removing the old bell and bell bearings. Installing the bearings and bell with fixing the bolt on the loctite.
5. Removal and installation of the internal combustion engine with the replacement of the rear cover of the motor with a pull-start and fixing the fixing bolts to the loctite.
6. Replacing the rotostarter. Removal and installation of the internal combustion engine with replacement of the rear cover of the motor with a rotostarter and fixing the fixing bolts to the loctite.
7. Replacing the electric starter. Removal and installation of the internal combustion engine with the replacement of the rear cover of the motor with an electric starter and fixing the fixing bolts to the loctite and connecting the wires of the electric motor and minus.
8. Internal combustion engine repair (bulkhead). Removal and disassembly of the engine, flushing the engine. Assembly and installation on the model.
9. Gearbox repair. Removing the gearbox from the model, disassembling the gearbox and replacing the broken gear with a new one, followed by assembly and installation of the gearbox on the model.
10. Repair of the transfer case of the Traxxas model. Dismantling half of the model's chassis to remove the transfer case, disassembling the gearbox and replacing the broken gear with a new one, followed by assembly and installation of the transfer case on the model, followed by assembly of the chassis.
11. Setting up the gearbox. The gearbox is tuned on the street with the model turned on, with the engine running and tuned, the gears are tuned one by one and checked on the fly. The setup may take a long time.
12. Replacing the clutch cams
13. Replacing spur(driven gear) on the IRON TRACK Himoto.
14. Pignon replacement(drive gear on the motor). Replacing the pinion (drive gear on the motor). Removal and installation of a gear on a locktype without setting a gap between the gears (spur and pignon).
15. Used engine tuning. Used engine tuning, cleaning carburetor and fuel wires and returning needles to factory settings. A used engine is considered to be any engine that was started and tuned independently.

GENERAL WORKS:

1. Body fixing repair (1 rack). Removing the broken and installing a new body mount with height adjustment.
2. Removal of backlash (1 axis). Removal of backlash using spacer washers (washers are not included in the price).
3. Servo replacement. Replacing the servo machine. Removal and installation, adjustment, trimming. In car models requiring removal of the engine + to the cost (engine installation).
4. Setting up control equipment and electronics (with the installation of the receiver). Setting up control equipment and electronics (with the installation of the receiver). Connecting wires and setting up the equipment, gluing the receiver and installing it into the hermetic box.
5. Replacing or soldering 1 connector on batteries and governors(connector cost not included). Replacement or soldering of 1 connector on batteries and speed governors (the cost of the connector is not included) the cost of 1 soldering contact. It is summed up from the number of soldering contacts.
6. Differential bulkhead (excluding oil cost). Differential bulkhead (excluding oil cost), disassembling the differential housing, cleaning the bulkhead or replacing gears and setting clearance, filling with oil.
7. Assembly and gluing of wheels (without the cost of glue). Assembly and gluing of wheels (without the cost of glue). Assembly and gluing of 4 wheels.
8. Oil change in shock absorbers (for 4 pcs.). Removal and installation of 4 shock absorbers, assembly and cleaning, flushing. Oil filling.
9. Replacement of suspension elements (butterflies). Removing and installing butterfly mount shock absorbers.
10. Replacing the suspension arms (1 arm). Removal and installation of the lever. Shock absorber and stabilizer fasteners.
11. Assembling the KIT kit. Assembling the KIT kit (price depends on the scale). Or transfer of model elements from the old chassis to the new one.
12. Charger battery. Charge the battery with a professional charger.
13. Diagnostics of batteries. Diagnostics of batteries on a professional charger, carrying out tests under load with monitoring of battery readings.
14. Carving a body of a 1:10 scale model. Cutting the body of the model using Lexan scissors (body only). The decorative body kit is not cut out.
15. Replacement of transmission elements (cardan, axle shafts, bones) 1 piece Replacement of transmission elements (cardan, axle shafts, bones) 1pc. Disassembly and assembly of the model unit with the installation of the transmission part.
16. Replacement of bearings (1 unit, 2 bearings). Replacement of bearings (1 unit 2 bearings). Replacement of the hub bearing, disassembly and assembly of the hub with replacement of bearings.
17. Replacing the chassis (deck) with a new one and transferring all elements. Transferring all elements from the old deck to the new one.
18. Replacement of 4 wheels. Replacement of 4 wheels. Removing old and installing new wheels.

Service center our shop "ShopNtoys" offers all owners of radio-controlled toys such a service as. In addition to repairs, our service center post-warranty service, consultations and technical support for correct operation all radio-controlled toys and models bought not only in our shop "ShopNtoys".

Tel. +7 495 315-23-27 repair and warranty service of models

The service center of our shop "ShopNtoys" offers all owners of radio-controlled toys such a service as. In addition to repairs, our service center provides post-warranty service, consultations and technical support for the correct operation of all radio-controlled toys and models purchased not only in our ShopNtoys store.

Very often, novice radio modelers find it difficult to choose radio-controlled toys and models, since today the market is saturated with all kinds of configurations and variety. The specialists of our ShopNtoys store will help you decide on the choice of a radio-controlled model or toy, advise which accessories are better for it, how to make tuning and which spare parts you need to purchase. If you do not have time to tune your radio-controlled model or toy, then the masters from the "" service center will help you solve this problem

For all novice radio modelers, the biggest challenge is running in a model or toy, as well as setting up a model or toy with an internal combustion engine and an electric motor. Correct engine tuning determines the lifespan of the RC model. There is a lot of information on the Internet on tuning engines and running in a model or toy, but if you are doing radio modeling recently, then it will be difficult for you to deal with so much information. In the department of our store " repair radio-controlled models »Our experts will help you do the correct running-in, set up the electric motor and internal combustion engine, as well as our specialists will help you carry out full maintenance of your model or toy.

If after an accident or accident you need repair of radio-controlled model, then in our store you will find a large assortment of spare parts and other accessories necessary for repair. All work on the repair of radio-controlled toys and models in our service center of the ShopNtoise store is carried out by highly professional modelers who have proven their skills with a multitude of assembled and repaired radio models.

In our store you can buy a radio-controlled toy and immediately leave it for tuning and running-in. The period of repair, tuning and running-in of a radio-controlled model or toy depends on the complexity.

We always go to meet our customers and try to reduce the prices for repairs as much as possible, but in each case, prices vary depending on the model and components that may be needed to carry out high-quality repairs.

Dear Clients! The Young Papa company is pleased to inform you that in our service center you will receive qualified assistance in setting up, diagnosing, consulting on the most popular models and brands.

OFFICIAL DEALER

Only our service center works with official representatives of such brands as Align, Aquacraft, Art-tech, Blade, Cheerson, Double Horse, Dynam, DJI, EasySky, Ehang, FlyZone, Heng Long, HIMOTO, HobbyZone, HouseHold, HPI, HSP, Hubsan , JoysWay, KYOSHO, Maverick, MJX, Nine Eagles, SYMA, Taigen, Tamiya, Team Magic, TRAXXAS, VsTank, WALKERA, WLToys, Xiro, and therefore, only we can install quality spare parts and carry a guarantee for the work done!

The miser does NOT pay twice

We believe that the service should be available to everyone and that is why we work only with trusted and direct suppliers from the manufacturer's plant. The fewer links in this chain - the cheaper the goods, we have only THREE of them: factory -> supplier -> WE!

MODEL SETUP

Our craftsmen will not only be able to recommend high-quality consumables, but will carry out a professional run-in of the model. When buying a model from us, you do not need to worry about the first launch - entrust it to professionals who will not only do everything for you, but will tell and show you the entire process of the first launch in detail!

Tuning radio-controlled models

If you want to race - remember that the stock model (model out of the box) is not ready to hit the track! Mandatory tuning - not everyone will undertake to prepare the car for arrival. We will not only recommend the necessary spare parts, but we will install and test the model before arrival! You can be sure that if the model is not intended for racing - we will honestly tell you about it and offer options to make your dream come true - to feel like a real pilot!

EXCLUSIVE

The model market is growing with new and newer models, and many sellers can only sell a radio-controlled model, but not supply it with spare parts, let alone make repairs. We do not refuse repairs until the very last moment - if only spare parts are really not available on the world market!

Time is money

We are the most customer-oriented company in the Russian market! We value our client's time and therefore we have delivery at night and absolutely free collection of goods for diagnostics when a factory defect is detected, and the shortest repair times will make you pleasantly surprised - the average time for a model in the workshop is from 15 to 40 minutes! We guarantee that you will enjoy our service department in every way!

Convenience without borders!

There are no distance limits for us! Any resident from any region of Russia should receive qualified advice and quality repairs! Our partners will take the goods from you and, in the mildest of times, will hand them over to us for diagnostics!

Our advantages

Repair warranty

Only a specialized service center will give you a guarantee for all types of work. The goods purchased in the Young Papa company are subject to FREE diagnostics of malfunctions with the establishment of the cause of its occurrence!

Work speed

Our professional craftsmen carry out all the work in the shortest possible time. 80% of the work is carried out in the presence of the client, followed by a demonstration of the serviceability of the model.

RC boat repair is a process that should be handled by a real specialist, not an amateur collector. Modern radio-controlled toys have a complex design, they are capable of developing high speeds, but such specifications due to the presence of a powerful engine that requires constant maintenance. Maintenance is also necessary for other equally important components, for example, blades, housing.

What is the peculiarity of the repair?

Although radio-controlled boats belong to the category of toys, there are models that can only be controlled by an adult; as a rule, they have an impressive cost, so no modeller wants to lose such a toy. Repair of radio-controlled boats is a rather specific activity. The foreman must have a sufficient level of knowledge and have practical skills to fix the problem, and not create a new breakdown, as happens in half the cases when an amateur intervenes.

Among other things, our specialists have the necessary modern equipment, thanks to which they can quickly diagnose and identify the true cause of the breakdown. Among the main factors that have a negative impact on radio-controlled boats and cause subsequent malfunctions, one can single out:

• Time;
• Inaccuracy;
• Mechanical damage;
• Self-study boat designs.

We can offer high-quality repair of radio-controlled boats with a complete replacement of components with original spare parts from the manufacturer. Engaging a specialist helps not only to restore the toy's performance in a short time, but also to save your own money. Desperate attempts to bring the boat back to life on their own do not lead to anything good, but the cost of subsequent repairs can increase significantly.

What you should pay attention to

We can offer our clients a wealth of experience and knowledge in the field of qualified repair of radio-controlled boats. The workshop has everything you need for this, and diagnostics are carried out completely free of charge within fifteen minutes. A large selection of original spare parts guarantees high quality performance.

Most often we are faced with breakdowns:

• Body mountings;
• Chassis, shafts and stabilizers;
• Engine;
• Rotors;
• Body;
• Axles, bushings and spacers.

Taking into account the statistical data, we purchase in a large assortment those components that are most often used in repairs. This professional approach allows us to perform renovation work in the shortest possible time. Moreover, we are ready to offer our clients an additional guarantee for all interventions.

For all offered spare parts the prices are within the limits of the available ones. Our service will help you bring the boat back to life, and if necessary, make it more powerful by replacing the old engine with a new, more improved one. Each time we remind our customers after repairs that any radio-controlled boat requires regular maintenance. Such safety measures will help prevent serious damage and extend the life of the product.

In the Service Center Young Papa we provide the following types of work on radio-controlled boats:

Setting up the model:

• Trimming
• Checking channels
• Test sync

1. Replacing the propeller
2. Replacing the collector motor
3. Replacing a brushless motor
4. Replacing a water-cooled engine
5. Sealing the model