1. Installation of a false wall for draft beer.
DIY bar counter
Carbon dioxide cylinder
2. Gas supply reducer
3. Beer barrel (keg)
4. Intake head
5. Beer cooler
6. Beer column
7. Drip catcher
8. Defoamer
9. Beer tap

10. Beer hose 11. Gas hose.

Using this equipment installation diagram, in a draft beer store you can install any beer system configuration that suits your outlet the best way
Firstly: you should decide whether you will install a false wall in the store to install defoamers in it, or whether you will give preference to installing a bar counter and then attaching defoamers to beer columns (towers). If the area of ​​the retail space and its configuration allow you to install a temporary wall across the room from floor to ceiling - in this case, all coolers,
gas cylinder and all the beer kegs will be located behind this false wall and will not get in the way. A variant of a false wall is a false panel. It is attached different ways on
load-bearing wall
, behind or under which you will install the equipment and kegs. Very often, a false panel is installed on the front wall of a cold room (the so-called “cool room”) and defoamers are already attached to it. If you prefer the design

point of sale you should decide whether you will use beer supplied to the bottle through coolers or whether the area of ​​​​the room and the availability of financial resources allow you to install a cold room (“cool room”).
The cooler delivers beer or any other drink into the defoamer and then into the bottle at a temperature of about 4-5 °C. In this case, the beer itself is stored in the main room at normal room temperature of about 20-25 ° C. This mode of storing beer in kegs is not recommended by manufacturers. In this case, beer does not last long. There is a risk that it will deteriorate before it is fully realized.
This risk is significantly reduced if your beer kegs are stored in a cold room at a temperature of 11-12 °C and then, passing through cooler flows, the beer is served to the buyer at a temperature of 4-5 °C.
Some owners of live draft beer stores set their cold rooms to operate at 4-5 °C, thus avoiding the need for additional installation of coolers in the system. In this case, you should competently approach the adjustment of the operating pressure of carbon dioxide supply to the system, reducing it to 1-1.5 atmospheres (a specialist installer of beer equipment will tell you the exact value of the gas pressure in the system).

Third: If you decide that you will install a bar counter in your beer store, then you can use two main methods of installing defoamers with this installation scheme.
- DEFATHERS ARE INSTALLED IN BEER COLUMNS (towers). This is a rather expensive method, since each beer tower is an additional considerable expense for its purchase, and the towers will be needed at the rate of 2 defoamers per tower - a considerable number;

- DEFATHERS ARE INSTALLED IN THE BEER BOX, mounted on top of the bar counter. This is kind of the same false wall, but in miniature.
The costs of manufacturing and installing a beer box are relatively low, since it is made from laminated chipboard, which is not difficult to find for sale in any construction hypermarket. In such a box, based on the distance between the defoamers of at least 130 mm, many taps can be placed. For example, 10 defoamers can be easily installed in a 1500mm long beer box. Moreover, all hoses - both beer and gas - are hidden from the eyes of buyers behind the walls of the box. A very convenient and aesthetic solution.

Good afternoon How much does a franchise cost? If I understand correctly, when you buy beer, do you have free equipment? Will there be a refrigerator for bottled beer and a refrigerator for snacks?

Good afternoon, our franchise is free and there are no payments even after opening and running a business! When you buy beer from us, yes, we will install draft equipment for you and serve you for free. We can provide two refrigerators for Tomsk Beer and Bochkarevsky, these are 2 top sales plants. You need to buy a medium-temperature display cabinet for fish yourself, either new or used. A cold display case is not needed for vacuum-packed snacks or individually sealed packages. Call if you have any more questions

Hello, I wanted to know if it is possible to purchase beer bottling equipment for the Trans-Baikal Territory and rent it

You can buy equipment from us, everything is in stock, prepayment, we will deliver it to the transport company you specified. We rent equipment only to those regions where we have delivery and sales representatives. Not in Trans-Baikal Territory. Thank you for your request.

Hello! Please tell me, is there delivery of draft beer to Ryazan and do you provide equipment for rent?

Hello and thanks for reaching out! Yes, we deliver to Ryazan, as well as provide equipment for rent.

How much does it cost to open a draft beer store?

To briefly formulate the answer, the minimum is 300,000 rubles. We will write an article in more detail with a sample business plan (soon).

Which taxation system should you choose when opening a beer store?

Patent. The most convenient form for today would be a patent. For example, when opening a store in the Kosino district, the cost of an annual patent will be 113,400 rubles, and when opening a beer hall in the Moscow region, the amount of taxes per year will be 30,210 rubles.

How can I pay for the goods?

1. cash upon receipt of goods


2. non-cash to the current account of Sberbank or VTB24


3. via the company website (coming soon)


4. through Sberbank terminals, through an operator in Sberbank, through Sberbankonline you can find us in the suppliers section (coming soon)

How can I order beer to a store?

If you don’t work with us, then call us, we’ll sign an Agreement and we’ll carry you around.

If you are already our client, then there are several ways:

1. Through your sales representative (if you have lost your number, you can check by calling +74951518585, state your legal name and store address)


2. Through managers in the office at +74951518585


3. Through our website catalog

On what days is beer delivery available?

From Monday to Saturday we deliver beer to stores.

Can I, without having an organization, buy beer from you wholesale? What if there are a lot of bottles?

No, but you can call us and ask us to find a beer store near you. (84951518585)

Do you make a false wall for selling beer and a bar counter?

No, we don’t, but we can suggest who will do it. Call (84951518585)

What kind of rack is it and why is it needed when opening a pub?

The rack is made immediately behind the false wall in order to optimize the storage space, coolers do not take up space among the kegs and so that the beer routes are the shortest distance, because it is important for us that the beer is cold!

It is made from timber with a minimum thickness of 50mm. Width 600 mm and Height 1000 mm, length equal to the length of your wall. Coolers are installed on the rack when installing beer equipment, so it is important that when our technician arrives, the false wall and rack are ready!

Do you install bottling equipment?

Yes, we do it for free. You need a false wall or bar counter, shelving, everything else will be done by our technicians.

Do you provide equipment for a draft beer store?

Yes, we do, for free. The main condition is to buy beer from us, that’s all.

We also give taps for free.

Is it possible to connect a PET keg a second time?

PET kegs can only be connected once. The second time, the intake head may no longer fit onto the keg, since the fitting is disposable. Connect the keg very carefully without sudden movements, do not knock on the keg or apply excessive external pressure.

Is there delivery of draft beer to Zelenograd?

Yes, there is, see our delivery area in the section.

What can’t you use to make a false wall for beer? And what is its width?

The wall into which the Pegasuses (taps for selling draft beer) crash must be strong and stable. Drywall cannot be used; all other materials are acceptable.

The minimum thickness of the material should be 10 mm and the maximum 16 mm.

If your design idea for the design of the wall is not included in these parameters, we will come up with something and definitely decide how to install taps in your beer wall.

What documents are needed to cooperate with the Beer Capital?

• - Certificate of state registration or Record Sheet;


• - Certificate of tax registration;


• - Lease agreement for commercial premises or Certificate of ownership;


• - Buyer’s details on a form with a sample of the “first” signature, a seal impression (if there is a seal);


• - a copy of the passport indicating the place of residence;


• - Licenses (permits) for the sale of strong alcohol (if available);


• - ID codes: (EGAIS);

additionally for legal entities:

• - Charter (including pages indicating the address of location and powers of governing bodies);


• - Notification of registration with the tax authority at the actual location (notice of assignment of checkpoint), if the legal and actual addresses are different with reference to the Unified State Automated Information System;


• - Extract from the Unified State Register of Legal Entities (no later than month period prescription);


• - A document confirming the authority of the manager (decision or protocol);


• - Order on appointment to the position of manager (director);


• - Power of attorney for an authorized person (if the Agreement is not signed by the manager);

Is it worth buying a beer business?

Yes, only for a reasonable price, or better yet, before purchasing, call us (84951518585) and find out how things were going with this store, which is now for sale, we will advise you (be sure to check with individual entrepreneur or LLC).

In fact, really evaluate the cost of the store’s property, and this is usually cash register equipment, a refrigerator and a split system for it, a refrigerated display case for fish, bar equipment, tables, chairs, and other things, if any. Please be aware that bottling equipment for pouring beer is not, as a rule, property (we provide it for use). Take into account the wear and tear of all property and negotiate with the seller to a price that is acceptable to you.

I consider it important, after purchasing a ready-made live beer store, to inform its regular customers about the change of owner and upcoming changes. Suddenly someone stopped going there, knowing that there was a careless salesman there, for example, who knew nothing about beer and could not recommend anything. It’s better to even change the sign, the name, so that everyone passing by will notice.

After all, you will run your beer bottling business your own way!

Good afternoon Do you provide non-alcoholic drinks for sale?

We will provide a complete set of bottling equipment FOR FREE !

All you need is a ready-to-install draft beer store and a stable monthly flow, namely 200 liters of one type per month. A minimum spillage of this volume is necessary, since the lifespan of unpasteurized beer is limited.

Device Pegas Designed for foam-free filling of beer from a keg into a PET bottle. This equipment allowed the appearance of specialized stores selling keg drinks on the Russian markets. The defoamer allows you to pour beer into a bottle without loss of quality and in a very short period of time. Now there are many different types Pegasus from different manufacturers. Our company uses only time-tested filling devices.

We will provide you with a set of equipment and install it in your store. Installation of equipment is carried out in a false wall or on a column specialized for Pegasus if you use a flow cooler, which is installed in all bars and restaurants.

The principle of cooling beer in a cooler is as follows: when the tap opens, the beer begins to flow along a long coil, which is located in the cooler bath, while the bath itself is filled cold water, the temperature of which is set on the cooler and is always maintained. Plus This method of cooling beer is that with an average spill, the beer is always poured into the bottle cold, despite the temperature of the keg itself and the beer in it. Minus The problem is that with a very large spill, the beer does not have time to cool and the last buyer in line can buy a warm beer. And also when using coolers, it is necessary to install an air conditioner in the place where kegs and coolers are stored (in the “warehouse” behind a false wall), since a lot of heat is released from the coolers and the room becomes very hot, especially in summer, which is bad for beer in kegs, it high temperature may turn sour ahead of schedule validity!

There is another way to sell beer without coolers - installation of a refrigeration chamber. This option is increasingly gaining popularity among conscious entrepreneurs!

The principle of cooling beer in the chamber is as follows: All kegs are placed in a refrigeration chamber, the temperature of which is +4C. At the same time, the beer remains the freshest, the yeast that is present in the keg does not multiply, resulting in the effect of preserving the beer and its taste characteristics. Beer from the refrigerator is considered the most delicious. The advantages are obvious. Of the minuses, this is of course the price of the camera; investments when opening a store will be needed more than when installing the coolers that we provide for use. And also, there should always be a supply of beer in the chamber in order to have time to cool down; if there is no supply of cold beer, then there is also a chance to pour warm beer for the buyer.

The choice of whether to install coolers or one chamber in the store is yours! Below you can see photos of different draft beer stores and in different ways sales.

This is what the classic and very first defoamer looks like, which has proven itself in the best way (the body can be either metal or plastic):

This is how the Pegasus installation method looks like in a false wall, while all the kegs and coolers are very conveniently located behind the wall without interfering with the seller or worsening appearance trading floor. In this version of the store, the false wall is made of wood:

The same false wall only made from a ready-made metal rack; this option is convenient because it is not attached to the floor, it can be moved as needed, and when splashed with beer, it is easy to clean:

Back view:

An example of placing pegasi in a rack (if small area store or the owner prefers this option):

Please note that kegs and coolers are located under the counter and will interfere with the seller’s ability to pour beer, and the noise from the coolers will be more audible in the sales area:

If you do not want to use flow coolers, but want the beer to always be cold in the keg itself, then you can install a refrigerator in the store:

View inside the chamber (such a rack is required behind any false wall, it will save you space):

Also an example of a refrigeration chamber, only with the installation of pegasi in two rows:

Technical characteristics of equipment for bottling beer "Pegasus":

• The productivity of the device (depending on the temperature of the beer) is 45-120 l/hour or 60 bottles/hour. That is, the lower the temperature of the beer in your keg or cooler, the faster you will pour it through the Pegasus.
• The pressure of carbon dioxide supplied to the keg and the device is 1.5-3 kg/cm3. This pressure must be set on the reducer, which is mounted on a gas cylinder with carbon dioxide.
• Additional consumption of carbon dioxide during accelerated bottling of beer (depending on the gas pressure in the keg and the intensity of beer bottling) 90-360 l/hour (0.2-0.8 kg/hour). One can of carbon dioxide is enough for about 2000 liters (if the beer is not bottled warm!, but cold +4+6C).

Below are photographs of flow coolers for beer bottling and on the right is a photograph of a carbon dioxide reducer:

When planning to open a store for bottling beer from kegs, be sure to take into account the energy consumption of the installed equipment; it often happens that landlords do not provide more power in the premises and when installing a large amount of equipment, problems begin, traffic jams are knocked out, the network cannot cope. Our chillers consume between 0.6 and 0.8 kW each. If you are installing a refrigerator, be sure to ask how much your split will consume and only then buy it, making sure that there is enough power.