Organizer  - an indispensable thing in the house for storing not only every little thing, but also some valuable things. Such a convenient and necessary little thing can be purchased at any supermarket.

And you can turn on the imagination and do it yourself. And we will help you create an organizer for any occasion.

How to make an organizer with your own hands?

• Making a box for storing all sorts of things is not difficult even for a beginner. You will need material, stationery and a little time.
• Materials for organizers of things are usually created from improvised things  of the things that go to the discharge or in rare cases, the necessary components are bought.

A small organizer for hairpins and rubber bands do it yourself for beginners

Surely, not one girl felt a mess in her hair accessories. They seem to be many, but they are not always in place. So, to bring gum with hairpins in a decent order, you need to put them in one place. The place should be beautiful and comfortable.

You will need:

• photo Frame;
• ribbons
• hooks;
• glue;
• scissors;
• ruler;
• cardboard.

Progress:

1. Measure the photo frame and cut the ribbons according to size. Glue on the back with a gap of 3 cm.
2. Then measure the sheet of cardboard and cut to the size of the photo frame, glue over the ribbons on the back of the frame.
3. Glue the hooks on the outside of the frame, placing as you like.
4. Now you can hang the photo frame on the wall or put it on the table.

DIY office organizer

To find a pen, some need to search the entire house and turn everything upside down. But if you have an organizer for stationery, you don’t need to go far in search of pencils and pens.

You will need:

• cardboard;
• pencil;
• harness;
• 6 cans;
• paper;
• scissors;
• glue;
• spray paint;
• ruler.

Progress:

1. Coat the cans with glue and cover with paper.
2. Make a pen as in the photo and wrap a tourniquet.
3. Then paint the jars and set to dry.
4. Make cans in pairs, inserting a handle in the middle, wrap everything with a bundle.

DIY lingerie organizer: step-by-step instructions with photo examples

The creators of furniture for things did not think about how they would be stored there. And in most cases, underwear suffers. Few people fold their laundry neatly always. Therefore, you can take advantage of a little trick and add a divider for clothes to the cabinet.

You need:

• shoe box;
• glue;
• scissors;
• ruler;
• stationery knife;
• pencil;
• paper for decoration.

Progress:

Measure the height of the cabinet in which you want to place the organizer. Cut according to size.

Determine how many cells you need and measure them by the size of the box. Cut the septum.

Decorate the inner surface of the box for storage.

Design the look of the organizer.

You should get a beautifully decorated box on all sides.

Determine the size of the cells and make cuts on the partitions on one side. The number of cuts affects the cell size, the more they are, the less storage space.

Decorate the partitions by gluing them with paper on all sides.

This is how simple it is to make a box for storing laundry.

DIY Makeup Organizer

You do not have time to buy a decent cosmetic bag for an arsenal of beauty? Or do you have so much of it that the travel bag breaks? Then a magnetic board for cosmetics will help you.

You need:

• large photo frame;
• magnetic sheet to fit the photo frame;
• small magnets for every beauty item;
• paper for decoration;
• glue;
• scissors;
• ruler.

Progress:

1. Measure the inner perimeter of the frame and cut a magnetic sheet along it.
2. Do the same with the design sheet.
3. Put a sheet for decor in the frame, then a magnet and close everything with a cover from the frame.
4. Glue magnets on all makeup items.
5. Hang in a convenient place.
6. The organizer is ready, now you will not lose anything and everything will always be in one place.

How to make a convenient organizer for jewelry?

There are not many decorations, you just need to pick up a roomy storage for them. A variety of caskets take up a lot of space, and besides, jewelry is sometimes confused in them. Therefore, we offer you an alternative option for storing jewelry.

You will need:

• frame;
• metal grid;
• pliers;
• spray paint;
• furniture stapler and staples for it;
• hooks.

Master Class:

1. Place the mesh on the back of the frame and secure with a stapler. Cut off the extra tails with pliers.
2. Turn the frame over and paint it, wait until it dries.
3. Hang the hooks, and you can hang jewelry on them. By the way, for some jewelry hooks may not be needed.

Large shoe storage organizer

Keeping shoes in boxes is not always convenient, and often it takes up a lot of space. So why not make one great shoe organizer?

You will need:

• plywood;
• electric jigsaw;
• roulette;
• pencil;
• wood glue;
• thin bars;
• self-tapping screws;
• sandpaper;
• iron rod;
• iron scroll mechanisms;
• paint;
• drill.

Progress:

1. Cut circles from plywood sheets, choose the number of circles according to the number of pairs of shoes.
2. Sand the edges with sandpaper.
3. Cut out partitions from the bars for each section of the cabinet. Consider that for one you need 6 pieces.
4. Make a hole in the center for the cabinet to spin.
5. Assemble the stand: circle of plywood + crossbars + circle of plywood + iron mechanism and so on, repeating the steps.
6. Pass through all sections of the rod.
7. Build the stand for the organizer and put the box on it.
8. Paint the organizer, wait until it dries, and put the shoes inside.

Headphone organizer

Often, headphones are lying around and getting confused. This is very unpleasant and takes enough time to unravel. Therefore, we have prepared an interesting life hack for you so that your headphones are always in order.

Prepare:

• funny pictures of 2 pieces;
• paper;
• glue;
• scissors;
• double sided tape.

Course of action:

1. Cut out the pictures.
2. Prepare a 5 × 10 sheet.
3. Fold the sheet in half and stick a picture on each side.
4. On the inside at the top, secure with double-sided tape.
5. Now you can wind up your headphones and not worry that they will get confused.
6. You can replace paper with felt, and use buttons as a fastener.

DIY organizer for little things: ideas with photos

To organize a trifle in one place, it is enough to create an interesting place for its storage. Then she will always be at hand. A creative box will fit perfectly into your interior.

DIY desktop organizer folder for papers and documents

Papers, like other work accessories, should be visible and in good order. And so that they are always at hand and look good, build a folder for storage yourself.

Tools required:

• colored paper;
• beer cardboard 2 pcs;
• glue;
• scissors;
• ruler;
• decorative paper.

Master Class:

• Paste beer cardboard over the paper for decoration.
• Cut sheets of paper 1 cm less on each side than beer cardboard.
• Using 2 long pieces of paper, make an accordion out of them. Bend 1 cm, and after each span, glue the sheets.
• Cut the crust paper and put together the cardboard, as in the picture in step 4.
• Glue the accordion with the sheets. Your folder is ready, fold paper.

DIY Handicraft Organizer

Craftswomen have a lot of gizmos that need to be stored somewhere. We suggest you make a box for small items.

You need:

• thick cardboard;
• glue;
• scissors;
• pencil.

Progress:

1. On a sheet of paper, draw a future box in a folding form. Draw a handle on top for convenience. On the second sheet, make a drawing of the exact same box.
2. Cut the drawing, bend along the fold lines and glue it.
3. Put them back to each other and glue.
4. Make boxing as you like and use.

Try the option for storing ribbons and ribbons, for this box you will need:

• shoe box;
• eyelets;
• paper for decoration;
• scissors;
• glue;
• pencil;
• ruler.

Progress:

• Tape cover and box with paper for decoration.
• Use a ruler and pencil to draw points for future holes.
• Attach eyelets.
• Put inside the tape and pass through the holes.

DIY crib organizer

For young mothers, we have prepared a convenient organizer that can be hung on a crib. In it you can put the most necessary things for the baby.

You need:

• the cloth;
• scissors;
• ruler;
• threads
• sewing machine;
• inlay;
• buttons or buttons.

Master Class:

1. Decide on the sizes and cut the fabric according to them.
2. To compact the organizer, cut out exactly the same piece of fabric for the base, fill your future organizer with a thin layer of synthetic winterizer and sew.
3. Make pockets of different sizes.
4. Make handles for fastening.
5. Sew around the edge of the inlay, attach pockets and handles.
6. Make a fastener from buttons or buttons.
7. Your organizer is ready, use your health.

DIY kitchen organizer

The kitchen for each housewife is her personal account, a place where masterpieces are created. Therefore, so that all the tools for creating unique things are focused in one place, we have prepared two options for the organizer.

For the first option you need:

• adhesive wallpapers in 2 colors;
• chips cans (Pringles);
• scissors;
• tape measure.

Progress:

• Measure the diameter and length of the can and transfer the data to the wallpaper.
• Cut the required size and glue the jar.
• Draw on the wallpaper of a different color the sign of the utensil that will be stored in the box.
• Cut out the sign and stick on the jar.
• Place the organizer in a convenient place. Such repositories can be made for each group of items.

The second variant of the organizer is adapted for interesting storage of cups. For him you need:

• small boards;
• thick tourniquet;
• hooks;
• screws;
• screwdriver;
• staples;
• ruler;

Master Class:

• Connect all boards with brackets using a screwdriver.
• On the back, fasten and tie the harness.
• Screw the hooks.
• And with chalk write funny inscriptions for the design of the board.
• Hang the organizer on the wall and hang the cups.

Do-it-yourself organizer for the back of the seat in the car

Some families need organizers in the car, especially those with small children. Just for such families, we have prepared a workshop on the manufacture of hanging boxes.

You will need:

• the cloth;
• scissors;
• sewing machine;
• threads
• velcro
• inlay;
• thongs
• decor elements.

Progress:

• Measure the front seat and transfer to the inside fabric.
• Draw the pockets. Then cut out all the components.
• Sew the edging along the edge of the main fabric and into the pockets on top.
• Sew pockets and straps for fastening.
• Attach decorative elements.
• Now your child will not be bored, and things will always be in one place.

DIY car trunk organizer

Sometimes in the trunk, everything is upside down. And to restore order, it takes a lot of time. But there is an alternative - make a closet for things in the trunk of your car yourself.

You will need:

• soft tissue;
• plywood sheets;
• self-tapping screw;
• screws;
• screwdriver;
• pencil;
• roulette;
• glue / stapler with staples.

Progress:

• Measure the dimensions of the trunk and transfer them to a plywood sheet to make the bottom. Then make the same cover.
• Saw the partitions according to the required height.
• Insert one at a time and fasten with a screwdriver.
• Cover the lid with a cloth, preferably similar to the one in the car.
• Fasten it with a stapler or glue.
• Put the organizer in the trunk and pack.

How to make a hanging bath organizer with your own hands?

An interesting organizer for the bathroom can be made from jars for storing cereals. To create such a thing you will need:

• board;
• jars for storing cereals;
• screws;
• screwdriver;
• round iron fasteners;
• ruler;
• pencil.

Work process:

Measure the points on the board where the jars will be attached.

Attach jar mounts.

Every housewife is exactly familiar with the situation when, opening the drawer with linen, it is not neatly aligned stacks of things that are discovered there, but sheer chaos. This is due to the most delicate material from which linen, socks and tights are sewn. The finest lace and the most delicate nylon do not hold their shape and flow along not only the body, but also on the chest of drawers, creating a mess there. Again and again it is necessary to shift things, restoring order. DIY organizer can solve this problem.

This practical and smart storage, like a gin, will make all your things stay strictly in their places and not mix.

Cardboard linen house

A ready-made laundry organizer can be bought at the store, but it is much more pleasant and creative to make it on your own. In addition, this is a less expensive way to get a case.

Boxes for storing linen can be textile or cardboard. This is an individual preference for each individual person.

The simplest workshop on making an organizer for cardboard underwear will inspire the creation of this store.

To create the product we need any boxes. This can be packaging from under shoes, household appliances or toys.

The size of the future underwear chest depends on where it will be located. Based on this, we select the appropriate box or glue it ourselves.

Also for work will be needed:

1. Paper for box decor: old wallpapers, newspapers, music pages, glossy magazine sheets, colored paper;
2. Long ruler. It is more convenient to use it than a tool with a short length;
3. PVA brush and glue;
4. Stapler with staples;
5. A simple pencil;
6. Clerical knife or sharp scissors.

We begin to tinker. First, think about how many things will be stored in this box. The number of cells into which we divide the organizer depends on this.

Related article: Openwork pullover and knitting skirt - a wonderful suit

Based on the size of the cabinet where the linen chest will be stored, we determine the height of the box. We measure out the necessary one, and cut off the excess with scissors.

Do not throw away the rest of the box. They are useful for the manufacture of partitions. The cap will also serve this purpose. The optimal cell size is 7 × 7 cm or 8 × 8 cm. Based on these data, mark up the box and cut blanks for the walls.

We decorate the details at our discretion. The box glued with old newspaper clippings or sheet music will look spectacular. For classic style, you can choose plain wallpaper.

The box itself is glued to match the partitions. Decor paper is better to choose wear-resistant. Bright and contrasting design with several colors and textures of paper will look interesting and unusual. It’s better to start work with the sides, and finish it with the bottom.

We arrange the outer side of the organizer with scrap paper, cloth or dense packaging material. Small allowances and bends from paper of a different quality and color look beautiful.

From the blanks for the cells we assemble the grate. To do this, we make cuts on the parts to the middle of the height and connect them as shown in the photo.

We insert the grate into the box and fix it with a stapler or glue. The product is ready!

The video will help answer questions arising in the manufacture of a linen organizer with your own hands.

Ribbon Organizer

If for some reason the storage for stockings and tights made of boxes turned out to be short-lived, you can make a more practical design - an organizer made of fabric.

The advantages of this product will be that it is durable, takes a minimum of space in the cabinet, is mobile and is suitable for any shelf.

To work, you need a strong bright fabric for the base; fabric of lower density of a different color for partitions; synthetic winterizer; decorative edging.

Go to step by step instructions. Cut out two rectangles. One of synthetic winterizer, and the second of the fabric for the base. Their sizes should be smaller than the box area so that the future box does not crumple. Sew long partitions of the store. To do this, on the base are sewn onto rectangles of contrasting material. They are the same length as the base, and twice as wide as the walls of the box. We sew the blanks in the middle, folding them so that the seam is inside. Get a double partition.

Organizer for linen  - A convenient thing in every home, because now all the linen is in place, and finding something right will not be a problem. Anyway, the order in the house should be in everything, it makes our life much easier. Today we will show everyone how to do this simple and very useful thing.

How to make an organizer with your own hands?

Organizer  - this is primarily a box. And so, for work we need:

Thick cardboard for partitions

Box

Cloth

Pencil

Sewing machine

Scissors

Ruler

If there is no sewing machine, we can sew all the parts manually.

Let's get started!

To present a general picture of the future organizer, we will write a little about it. An organizer is a box in which there are many pockets for linen. If we don’t have a box, you can make it yourself; if you have one, it remains to do it, just a partition for it.

1 . First of all, we need to calculate the size of the box from which we will make our organizer. Then calculate at what distance the partitions will be, and make them out of thick cardboard.

2. Now we need to sheathe them with fabric. First, measure it. Fabrics should be measured more than the cardboard itself, so that it is convenient to sew it. In our case, we will sew several partitions into one at once, so that in the future it would be easier to insert and fix them together.

3.   Gently sheathe cardboard.

4.   Now we need to connect all the partitions together, they can simply be sewn. As a result, we should get just such a blank:

5 . We can also sheathe the box with the same cloth, after which we insert partitions into it.

6 . Having fixed the partitions in the box, we get a ready-made organizer, which can already be used for its intended purpose!

Where do you store underwear and various little things (socks, handkerchiefs, etc.)? In plastic bags or in crumbling piles of linen on a shelf? We offer you a more modern way - to store accessories in convenient organizers. Such useful things can be bought both in the store and made independently at home from improvised materials.

Having made such an organizer once, I would like to store everything in such boxes in the future. The point then is not even beauty, but practicality and convenience.

So, to make an organizer you need the very minimum:

Box (you can take it at the supermarket, or you can use it from under the shoes).

Cloth (size depends on the box).

PVA glue and small moment glue.

Stapler.

Thick white cardboard.

Masking tape (may not be useful).

Pencil, ruler.

For decoration, you can use something of your own. Used here:

Wide satin ribbon.

Openwork ribbon.

How to make a beautiful organizer out of the box with your own hands

First of all, it is better to glue the box with masking tape so that it does not fall apart and is stronger.

Then we proceed to the manufacture of viscera. To do this, we need cardboard, folding it in half, we get strips of the necessary length, their width should not exceed the height of the box. If, on the contrary, the box is very deep, it must be cut to the desired height.

With the length and number of strips, we determine based on the width and length of the box. The cell size in the end should be about 5x5. For example, the figure.

Now these strips need to be properly incised. Since their width is 11 cm, the incision must be 5.5 cm both there and there. We make incisions every 5 cm, from the side where the cardboard is glued, i.e. not where the fold is. We cut it in the same way:

Now we connect everything together to make the design.

Here, a satin ribbon is pre-glued on top to make the box look more beautiful on top. The design is ready. We proceed to the design of the box itself.

We glue the box with fabric, and in this case, the fabric is simply fixed with masking tape at the bottom of the box and at the bottom of the box.

We close the gluing places with a white sheet of cardboard, or with something else at our discretion.

Now we install the design inside the box. In this case, 5 cm cells were made and two larger compartments.

After installation, the box can be decorated by any means, in this case, it’s just a satin ribbon and an openwork ribbon. We glue the tape on the adhesive moment, and fasten the ribbon to the stapler. The result is as follows:

In each house there are many small gizmos that are usually simply thrown off into a chest of drawers or a closet. Keeping them this way is not very convenient - everything seems to be in place, but at the same time everything lies in a big pile, in which there is neither logic nor order. But you want to quickly and easily find and get the right thing without unnecessary gestures and just as quickly determine it in place after use. Special separators were invented for this case.. You can buy them, or you can do it yourself. How to make separators for boxes with your own hands, without spending a lot of time and money?

Cabinets, drawers, special baskets or boxes and other items, the purpose of which is to simplify the storage of things and restore order in them, called the clever phrase “storage system”. They are necessary for the house to have order and comfort, otherwise, when everything is dumped with one pile of things, there can be no talk of any comfort. It is also impossible to quickly find the desired small item if it does not have its permanent, strictly allotted place. But if the storage of things in the house is organized correctly, then there will be no mess, everything will be in its place, greatly simplifying the life of a person.

On a note!  Also, storage systems allow you to optimize the free space in the house without cluttering it.

Storage systems can be different in type and type, in size and purpose of use. So, first of all, they can be divided into openwhich include hangers, window sills, shelves, and closed  - these are cabinets, drawers, chests of drawers, etc. Inside each large-sized storage system, smaller ones can be involved. For example, in the same cabinet you can hang a scuba or put a box for small items, and in a chest of drawers - put a smaller organizer or put dividers, which will be discussed below.

Table. Various large storage systems.

System view	Information
	Such storage systems include everything that has a solid, rigid frame. It can be cabinets and chests of drawers, bedside tables and other furniture. Most often these are wood products, but there are also plastic variations. You can add them to objects of various sizes and purposes, depending on the purpose of the system itself. Smaller storage systems can be installed inside.
	Such systems are usually open, unlike frame systems, which most often have doors. They are mounted on walls and can be used depending on the purpose. So, the main example of such a system is an ordinary hanger.
	This is a suspended type of structure for storing things and also does not have a solid frame. Most often, such systems are made of mesh fabric and have many pockets for various items. They can be fixed on a special rod or hooks in an upright position. They can be used both outside and inside other storage systems.
	These elements are necessary for hanging various things and clothes. They help to keep wardrobe items in proper form, do not allow them to wrinkle and deteriorate. The rods can be installed both inside the cabinets and outside. Hangers can be of various types. And those that are used inside the cabinets, and those that can be installed on the floor or placed on the wall.
	These systems can also be of various types, but most often they are part of a larger storage system. We are talking about dressers and cabinets, desks and kitchen sets. They often have just small boxes for storing small items and various utensils. Organizers and dividers can be used inside such boxes to optimize storage of items.
	Shelves are usually an open variation of the storage system, but there are also lockable doors. As a rule, they are used to decorate a room or used to store books, various bottles, etc. They can also be additionally equipped with organizers or be part of a larger storage system.

  Liner lighter

You can make a beautiful and original lighter from the liner yourself! There is nothing complicated in the manufacturing process, you just need to have a minimal set of tools, basic skills and.

Small storage systems

In addition to large-sized systems, there are also all kinds of small ones that simplify the storage of small-sized items and prevent them from existing in the house with one big pile. Often they can be installed inside chests of drawers, on shelves or be suspended and located anywhere in the apartment. Everything will depend on the desire of the owner of the house, as well as on the design and capabilities of the premises.

Consider the main types of small storage systems.

1. Pockets  - convenient storage systems for rooms such as kitchens and bathrooms, as well as toilets. You can use pockets in cabinets, but usually this is impractical. They are a soft organizer with many compartments. Usually made from fabric or film.
2. Mesh baskets  - Usually used as an extra storage space for small items. Conveniently placed in a closet or under the bed.
3. Vacuum bags  - The optimal solution for storing winter overall clothing such as down jackets, as well as for transporting a large number of clothes. They help to reduce the area occupied by things in the closet due to the fact that excess air can be removed from the bags using an ordinary vacuum cleaner. The volume of clothing is largely due to this decline. The only negative is that clothes are wrinkled heavily in such bags.
   
   
4. Hanging shelves, shelving, scuba diving. This is what you can buy in the same "Ikea" or other similar stores. They are usually hung on racks in cabinets and stacked in them. Immediately it turns out several sections. As a rule, such shelves have a rather soft frame and, if desired, they can be folded and removed if there is no need to use them.

Advice! Depending on what you plan to store, you need to choose a storage system. So, small elements of the wardrobe can be placed in small textile drawers, plastic organizers are ideal for storing kitchen utensils. Also, something can be stored in cardboard boxes, etc. Plastic and fabric products are perfect for storing children's toys.

And now about the delimiters

Separators for drawers are special slats that are used to optimize the free space in any drawer, regardless of its size or size. Simply take the appropriate separators. Usually they are made in the form of strips that are assembled inside the box and allow you to create several compartments in it to accommodate things in them.

On a note!  Separators for boxes can be replaced with organizers that are simply installed inside. They have several compartments.

Separators for storing small kitchen utensils are especially relevant, they are also convenient to use for cosmetics, tools, medicines and other small things. If you put all the small items without using the organizer just in a box, then in any case they will be mixed up with each other, and you will have to look for the desired item for a long time. If there are dividers, it will not be difficult to get any thing, because it will lie in its place strictly reserved for it.

When it comes to storing kitchen items, such as forks, spoons, knives, it is best to use plastic or wooden dividers. They will not be as susceptible to moisture as cardboard or sheathed fabrics, although the dividers can be made of various materials. But for the storage of small items of clothing, cosmetics and other things, you can use cardboard dividers, covered with cloth or pasted over with paper. There can already be no contact with water, and therefore you don’t need to worry about something deteriorating.

On a note!  Instead of separators for kitchen utensils, you can use small trays specially designed for installation in drawers. It will not allow moisture to get to the wooden bottom of the box. However, if there is a desire to use dividers, then it is recommended to stick oilcloth on the bottom. It will protect its surface from contact with water.

You can use dividers in the bathroom, if there is some kind of chest of drawers or a cabinet with drawers. And here it’s also worth evaluating which ones are better to use - plastic, wooden or cardboard. Everything will depend on what needs to be stored. So, rags and sponges are well stored only in plastic containers, with plastic dividers. But some dry personal hygiene items can be placed in boxes with wooden or cardboard dividers.

Important!  Bathroom and toilet - places with high humidity. It is better not to use storage systems that are exposed to the negative effects of water. Otherwise, they will not last long.

What can be made of?

Separators can be bought at the store, but, unfortunately, they do not always have suitable sizes. So the easiest way to do it yourself is by the parameter of the desired box. So, you can make dividers from:

• cardboard;
• plastic;
• metal;
• tree.

In addition, materials such as fabric, paint, oilcloth, paper, etc. can be used. They are necessary to decorate the surface of the dividers if necessary.

The easiest way to make cardboard dividers, but they can not be used in the kitchen. But in the room they will have just right. For the kitchen you will have to make these storage systems from wood, and even cover it with a protective varnish. You can also try to make them out of plastic.

As auxiliary tools you may need:

• scissors;
• scotch;
• glue;
• wood hacksaw;
• brushes;
• ruler and pencil.

Let's look at a couple of examples of creating DIY separators. We will use wood and cardboard.

Option number 1. Making cardboard dividers

Step 1.  The first step is to determine the size of the separators. To do this, you need to know the length, height and width of the box and in accordance with these parameters to determine the size of the storage systems themselves. Next, you need to draw blanks for dividers on a cardboard sheet. Their length will be equal to the width or length of the box, and the height to the height of the box or slightly lower. It is important at this stage to understand how large the sections should be in the end.

Step 3  Now you need to cut the film for pasting the dividers. You can take a self-adhesive option. One piece of film for one separator must be sized so that it is possible to completely wrap the part with it.

Step 4  With a film, you need to glue all the parts very carefully, avoiding the appearance of air bubbles on the surface. You can remove them if you iron the details with a card. Details need to be pasted on all sides, even from the side.

Step 5 Then you need to make notes on the ends of the workpieces in places where cuts will be made to enable the connection of individual elements into one system. The width of the cutouts should be the same as the thickness of the cardboard.

Step 6  It remains only to cut the planks on the marked marks. It is important not to cut them to the end, otherwise the system cannot be assembled.

Step 7  Then you should connect the parts into a single system and install it in a box.

In our new article, we have collected the best options for manufacturing a hand cultivator! Schemes, drawings, examples, photos and step-by-step instructions ... All this, as well as many other usefulness, can be found!

Video - Partitions from cardboard

Video - Making a laundry organizer

Option number 2. How to make wooden partitions

Step 1.  To begin with, from a thin sheet of plywood, you need to saw individual parts according to the size and pattern of the dividers. They must be the same height as the box. In total, 4 walls and 3 partitions should turn out.

Step 2  In this case, grooves need to be made in the lateral parts, which will help to join the individual parts into a single system. Separators themselves will be inserted into them.

Step 3  Now all elements of the future storage system need to be sanded.

Step 4  You should connect all the side elements of the organizer to each other. They can be knocked together with small nails.

Step 5  Now it’s worth glueing all the corners with glue and grease them with the same places where the dividing strips will be installed.

Step 6  It is necessary to fix the divider bars inside the box. When the glue dries, the storage system can be varnished.

Step 7  When the varnish layer dries, you should install the dividers inside the box and you can use them.