Built-in appliances are no longer considered something extravagant and exotic. On the contrary, the choice of certain built-in kitchen appliances is much more preferable for many, since it brings with it many advantages. A small kitchen, equipped according to standards, often looks cluttered due to the large number of appliances. Hidden appliances can make the interior harmonious and stylish.

Built-in gas stoves

These kitchen appliances are independent or dependent modules that are located in a cabinet or countertop. This solution allows you to significantly save space in the room. The built-in stove will be in perfect harmony with furniture, hoods and other kitchen appliances.

In dependent models of this technique, the oven and the hob are connected, so they are located side by side in the kitchen set: there is a gas hob on top, and an oven on the bottom.

The independent option is more mobile. The hob and oven work autonomously, so you can embed this type of gas stove anywhere, even outside the countertop.

Advantages of built-in gas stoves

Before considering the question: “How to build a gas stove into a cabinet or countertop?”, You need to find out all its pros and cons. Consider first all the advantages of such a technique.

1. First of all, it is an opportunity to arrange kitchen equipment comfortably, compactly, without overloading the room with overall equipment. This is especially true in small kitchens.
2. The hob and work surface united by a common worktop look very aesthetically pleasing. The oven door is flush with the doors and drawers of the kitchen unit, which is very harmonious. The kitchen becomes more spacious. A separate gas stove in the kitchen in this case will be clearly a loser.
3. In a solid countertop without cuts, debris, grease does not clog into the cracks that are always around individual plates. With built-in appliances for cleanliness, you just need to wipe the surface. Isn't this what every housewife dreams of?

Disadvantages of built-in kitchen appliances

The main disadvantage here is the high cost, because, in addition to the financial costs of buying the equipment itself, you still have to purchase new kitchen furniture. And professional installation is not cheap at all.

You can build a gas stove yourself, but you need to remember that violation of the installation rules can lead to very disastrous consequences.

Dimensions of built-in gas stoves

Before you build a gas stove in a kitchen set, you need to find out its size. It depends on how many burners are located on it. The most common are surfaces with 4 burners. Their averages are:

1. The depth is 45-55 cm.
2. Plate height - 3-10 cm.
3. Width - 50-60 cm.

Consider how to build a gas stove in the kitchen yourself.

Tools and materials required for installation

For self-installation of a gas device, you will need the following materials and tools:

• the panel itself;
• sealant;
• pencil;
• wrenches;
• saw or jigsaw for woodworking;
• level;
• gas winding;
• certified steel hose;
• fasteners.

How to embed a gas stove in a kitchen set?

Photos of the surface itself and some stages of work are presented to your attention in the article. Before installing the stove, it is important to choose its location correctly. You should focus not only on how this item will fit into the interior of the kitchen, but also on the fact that:

1. A prerequisite for installation is free access to the cooking surface of fresh air.
2. It must be remembered that it is impossible to install a gas stove next to a sink, since splashes of water should not fall on the heated surface when washing dishes.
3. Also, it is undesirable to place a gas hob next to the refrigerator, as its wall will heat up.
4. The hob must be located in the kitchen at a safe distance from other pieces of furniture.

Sawing a hole

Before you build a gas stove into the countertop, you need to make a hole. This process is not difficult.

1. In order to install the surface with your own hands into the countertop, you should, first of all, know its dimensions. As a rule, they are indicated in the instructions, so you do not need to invent anything. You can also take measurements yourself. To do this, turn the panel over and use a tape measure to determine its length and width along the inner edges.
2. When working, pay attention to the fact that the instructions give the values ​​\u200b\u200bof the minimum indents from the edge of the countertop. You can only change them upwards, since an edge that is too narrow can break off after a while.
3. Now, according to the dimensions of the gas stove, you need to make markings on the countertop, using a tape measure, pencil and square for this. It is imperative to ensure that all lines are parallel and the corners are right. A panel will be built into this place.
4. We drill a hole where the cutout will start from. It is done with an electric jigsaw. To obtain an even cut, it is recommended to use a file with fine sharp teeth. Otherwise, the cut edge may crumble. If there is no file, you can use a manual milling cutter to work, round off the corners with a radius cutter, and grind the cuts.
5. The sawdust formed during operation can be easily collected with a vacuum cleaner.

After the hole is ready, you need to try on the hob to make sure everything was done accurately and correctly.

Sealing and sealing

Before you build in a gas stove, you need to treat all sections with nitro-lacquer or silicone sealant, which will protect the countertop from premature damage, getting wet, dirt, and swelling. You can also use a self-adhesive seal that performs the same functions. It is glued on top so that the edges of the hob lie on it.

For edge seals, you can also take aluminum tape, which also protects the countertop from temperature changes. Remember that a quality sealant can prolong the life of the countertop, and it will not need to be repaired or replaced.

Connection to the countertop gas stove

Let's consider how to build a gas stove into a countertop (photos of some stages in the article).

When installing the stove, remember that all work involving gas is very dangerous and requires compliance with all established safety regulations and instructions.

One of the important points is the correct choice of a special hose for connecting the stove. They are metal, selfie and rubber. The hose must be certified and it should be purchased only in a special store.

So, how to embed a gas stove in a countertop?

Before proceeding with the installation of the plate, you need to carefully inspect it. It is very important that it does not have any mechanical damage. If none are found, you can get to work.

Installing a gas stove is easy. For this you need:

1. Insert the device into the hole prepared for it.
2. Using wrenches, connect the gas hose to the gas supply cock. In order to avoid gas leakage, the connection point must be wrapped with gas winding.

3. Connect the other end of the hose to the hob. Please note that there are two options for outlets, one of which is for a balloon device.

5. After the device is connected to the gas line, you need to open the gas cock. Lubricate the joints with soapy water, which will help to understand whether there is a gas leak or not. If the soap foam is motionless, then everything is in order.

6. Check all burners.

Safety

Compliance with safety precautions will help to avoid irreparable mistakes. We offer some tips:

1. It is better to choose a gas hose with a length of no more than 3 m. It is forbidden to connect the hoses together.
2. If you want to transfer the gas stove to another room, this must be agreed with the relevant authorities.
3. To check the tightness of the hose that comes from the gas line, you can not use an open flame. This mistake can be fatal!

So, we looked at how to build a gas stove into a kitchen set on our own. Before performing work, it is advisable to evaluate your abilities and skills. If there is any doubt that this is within your power, then it is better to turn to professionals. However, it is worth noting that the installation process itself is not at all complicated and almost everyone can cope with such a task. Most importantly, try to carefully read the instructions and purchase all the necessary tools and materials.

But remember that for the installation of gas equipment, permission from special regulatory authorities must be obtained, which, after installing the stove, must necessarily check the quality of the work performed.