Site sections
Editor's Choice:
- How to unlock the washing machine ariston
- Pros and cons of LED lighting
- Impulse relay: device and connection
- How to calculate the illumination of a room with LED lamps?
- Plastic box - an aesthetic do-it-yourself wiring
- Electricity consumption of underfloor heating: electric and film
- Installing a pump in a well: how to properly install pumping equipment
- Electrician Tool Kit Overview
- How to choose a water heater: the most complete list of evaluation criteria
- 1 acoustics on the example of Sven SPS-860 and Realtek ALC889 codec
Advertising
Why do you need LED lighting for the kitchen under the cabinets |
To ensure a comfortable environment these days, LED kitchen lighting is often used under cabinets. A detailed acquaintance with the technical means and installation techniques will come in handy in practice. In some cases, it is quite permissible to carry out the entire range of work with your own hands, without the involvement of third-party specialists, unnecessary costs and hassle. First, it should be noted the reasons why this particular type of lighting fixture was chosen. Their short service life is accompanied by increased energy costs. Such devices have impressive dimensions, they are difficult to hide in furniture elements. But these fragile flasks contain chemical compounds harmful to humans. Careful handling is required when replacing. The large size means limited application in confined spaces. Halogen bulbs also consume a lot of electricity. These are point light sources. Taking into account the above disadvantages, the following are the advantages of LED lighting for cabinets:
The only drawback is the high cost. But for an accurate comparison, you need to calculate how long the LED lighting for the kitchen under the cabinets will work. When summing up the final result, taking into account the cost of paying electricity bills, it is not difficult to draw the correct conclusion. This room has several areas: for working with food, sink, hob, table for eating. They do not need to be used at the same time, so local installation is fine. Different equipment works here, ventilation is often used. Vibration, high humidity, temperature drops are not excluded. These unfavorable factors will not damage the LEDs. Other devices in such conditions will fail faster. Review of surface-mounted LED kitchen lamps under cabinetsThe following illustrations show the potential and different applications of this instrument group. These products are available in standard sizes. They are suitable for completing cabinet furniture. This example shows the installation of the product in a cabinet recess. This schematic illustration shows the case. It is created from aluminum, metal alloys. It is designed not only to create the necessary rigidity of the frame. With its help, excess heat is removed, which is emitted by semiconductor devices in the on state. The lid is made of translucent matte polymer. It scatters radiation. While maintaining a small distance between the diodes, it seems that a solid strip lights up inside. Such devices look like special high-tech cabinet supports. They are actually economical light sources. They are placed over separate functional areas. This luminaire model is attached with screws to the bottom wall of the cabinet. It is connected to a standard 220 V power supply, so the necessary hole for hidden wiring is created in the furniture. Touch control is applied here. To turn it on, just touch the designated place on the device case. Related article:
LED recessed furniture luminairesThis kitchen unit backlight is installed in the furniture structure.
This model is equipped with a push-type connector. When the cabinet door is pulled out, voltage is applied to the electronics. No additional user action is required to turn off the device. Other locations for LED devicesWith the help of the following figure, the possibilities for eliminating certain imperfections in the interior are demonstrated. Installation of such overhead LED kitchen lamps under cabinets is made in order to facilitate the visual perception of large heavy objects. The illusion of "floating" objects is created, not resting on the floor. Note for comparison to areas without backlight. They look less harmonious. Control devicesLED semiconductor devices work when connected to a constant voltage of 12-24 V. Therefore, it is necessary to equip the system with a specialized device. It converts the standard AC voltage of 220 V. In some models, the corresponding unit is installed inside the luminaire body. Article |
New
- Psychology of educational activity of a younger student. Psychological foundations of teaching a younger student.
- Introduction to the specialty
- Introduction to the specialty
- The psychology of teaching a younger student
- The transition to NEP and repression against dissent 20 30 years of the USSR
- Moscow State University of Press Features of the use of impersonal predicative words
- Responsibility falls on the shoulders of the farmer
- Keynesian model of macroeconomic equilibrium ("Keynesian cross")
- Business game "manager's work week"
- Moscow State University of Printing Arts Computer networks are not used