Male hand using Tv remote control

If the TV does not respond to the remote control, there are a number of reasons for this. Today we will tell you what could be the reasons for this and what to do if the TV does not respond to the remote control.

Possible reasons

Read also:TOP 15 Smart TVs | Rating of current models in 2019

If the reason is in the remote control (RC) itself, then it is quite possible to do without the help of a specialist.

However, if the reason lies in the TV itself, then the only way out is a service center. But first you need to find out what is the reason.

Batteries

Read also:TOP 12 Best Smart TV Boxes for Android and iOS Platform | Overview of current models in 2019

If, when trying to perform manipulations using the remote control, the signal is not stable, intermittently or completely turns off spontaneously, it is worth checking the batteries.

They could be discharged or leak.

Often, defective batteries can come across in stores. When tested, they work properly, but after a few days of use they can be completely discharged.

Therefore, even if the batteries are new, it is worth checking them.

Remote control malfunction

Read also:TOP-12 Best set-top boxes for digital TV (DVB T2) | Overview of proven models 2019 + Reviews

The cause may also be a malfunction of the remote control itself.

To begin with, it is worth checking whether the infrared light bulb is working, which supplies a beam invisible to the human eye to the TV.

If the TV does not respond to the remote control when you turn it on / off, or when you switch the sound or channels, the result comes after repeatedly pressing the remote control button, then the reason is the loss of the signal.

You can try to solve this problem yourself by simultaneously pressing the Program and Volume buttons on the TV case.

If the problem persists, you should contact the service center for help.

Specialists can change the firmware of the device to a later version, and the TV will work properly.

Extraneous interference

Read also:Smart TV set-top box for TV: What you need to know when choosing

This phenomenon is extremely rare, but it should not be ruled out. It is necessary to make sure that nothing interferes with the operation of the remote control. Such interference can be the flickering of LED lamps, microwave and microwave ovens.

Most often, this problem catches those who have incorrectly placed the TV in the kitchen. Thus, it is worth noting that the TV categorically cannot be installed on the microwave.

It is interference from microwaves that can cause the TV not to respond to the remote control.

Mechanical wear

Read also:TOP 8 Best 4K TVs | Overview of current models in 2019

The reason may also be a temporary factor. If the remote control membrane is worn out, the buttons will sink and stop responding to manipulations.

Also, the reason may be the wear of the control board. This is as important a part as the membrane. Therefore, if the reason lies in wear and tear, there is only one way out - the purchase of a new remote control.

TV malfunction

Read also:Which TV is better to choose? TOP-12 current models of 2018

If, after finding out all the reasons, it became clear to you that the control panel is fully operational, then the reason lies in the malfunction of the TV itself.

How can I solve the problem

Read also:How to get rid of ads in the browser - Effective ways

If dead batteries are the cause of the problem, this is the easiest option. You just need to replace the batteries with new ones.

The same goes for outside interference. They need to be removed and everything will work. One of the options below will help resolve the issue.

1 Repair of an old remote. If the remote control needs to be repaired, you can take it to a service center. There it will be repaired and you will be able to use it again. However, repairing the remote control can be much more expensive than buying a new one.

2 Buying a new remote control. If you know the model of your TV, just go to a specialized store and name the model. The specialist will select the right remote control for you. You can also purchase a universal remote control, which is enough to synchronize with any TV.

3 Installing a special application on a smartphone. At the moment, there are many smartphone applications that can replace the remote control for the TV. This option will help you replace the remote until you get a new one.

4 Service center. If after all the checks the control panel turned out to be working, then the reason lies in the TV itself. In this case, the service center specialists can help you. The addresses of service centers can be found in the store where you purchased the TV. And if the equipment is still under warranty, perhaps in the store itself they can take the TV for repair or replace it with a new one.

Replacing with a universal remote control

Read also: Buy with pleasure: TOP-30 best online stores in Russia

Universal control panels are increasingly becoming part of everyday life.

If the original remote control from your TV is broken, so as not to look for the same one, you can purchase a universal remote control.

According to the principle of setting, universal remote controls are divided into 2 types:

• programmable;
• trained.

The universal remote control in appearance can be like a regular remote control, or it can be a key fob remote control.

If everything is clear with the first, then the question arises about the second: what functions does it carry in itself?

The answer to the question is quite simple: the most basic functions.

• Turn on/off the TV
• volume control
• channel switching
• AV mode
• turn on/off the mute mode.

Setting up the universal remote

Setting up the universal remote control is quite simple.

If you took a trained remote control model, then you just need to enter your TV model on it and everything will work fine.

If you purchased a programmable universal remote control, you will have to configure it yourself. To do this, follow a few simple steps:

1 Turn on the TV using the button on the cabinet.

2 On the remote, press and hold the SETUP button (may also be called SET ). You must hold the button until the red light on the remote control lights up.

3 Next, press the volume up button (VOL +) several times. When you press the button, the red light that came on during the previous step should flash. You need to press the button until the remote finds the code for your TV. This will be reported to you by the volume level scale that appears on the screen.

4 When the scale appears, you must press the SETUP (SET) button to store the code in the remote control's memory.

After the manipulations, you need to check the setting. Try changing channels, adjusting the volume. If this does not work, repeat the setting.

The most popular models of universal TV remotes

Among the universal remote control, as well as other equipment, there are also "favorites" that users give preference to.

The simplest and most inexpensive universal remote control. Suitable for all TV models.

Operates on two "little" batteries. Comes with instructions for setup and use. Approximate cost - 500 rubles.

This model features large buttons, which is a big advantage when used by older people.

Operates on two "little" batteries. Comes with instructions for setup and use. Approximate cost - 900 rubles.

This model is capable of supporting up to four devices simultaneously. Operates on two "little" batteries.

Configuration via USB is possible. The kit includes instructions for setup and use. Approximate cost - 1500 rubles.

This model belongs to the premium remote control, capable of supporting up to 6 devices simultaneously. There is a built-in motion sensor.

Battery operated and comes with instructions for setup and use.

Approximate cost - 2000 rubles.

Premium universal remote control model. Supports up to 8 devices simultaneously as well as button programming.

Operates on two "little" batteries. The kit comes with instructions for setup and use.

Approximate cost - 5000 rubles.

The most advanced and expensive premium class model. Supports up to 15 devices at the same time as well as PS4.

It is equipped with a color touch screen, which makes it easy to set up the device. Powered by a rechargeable battery that can be charged via USB.

The kit comes with instructions for setup and use.

Approximate cost - 15,000 rubles.

We have just given some examples of the most popular universal remote controls. As we have seen, the more functional and "fancy" the remote, the more expensive it is.

However, it is worth considering that the more expensive model has a lot more features and capabilities than the cheaper one, and also supports multiple devices at the same time.

This model is perfect for those users who have a large number of equipment in the house that require remote control.