As a main or auxiliary heater for a garage, private house, cottage or industrial premises. But how to choose this heating device correctly, and what characteristics should you pay attention to in the conditions of the richest assortment presented on the modern domestic market?

To decide which electric gun is better, you first need to make a choice between several parameters:

It should be mentioned that from how much the electric thermal

Its quality, durability and reliability, the type of heating element and the availability of automation depend on it, because it is well known that good equipment cannot be too cheap.

To help our compatriots in choosing a sufficiently high-quality and not the best one, the specialists of our company have compiled a rating of the main models presented on the domestic market.

Manufacturer Ballu with model BKx 3

The ballu bkx 3 heat gun, in essence, is a fan heater installed in a fairly compact metal case with a polymer coating. The main purpose of the device is the heating of residential, public and domestic premises. To heat the air flow supplied by the axial fan, the device is equipped with a highly efficient ceramic heater.

• The device is powered by a single-phase household power supply. With a relatively small size, ballu bkx 3 has a good performance of 120 m 3 / h. With a power of this fan heater of 2 kW, it is able to heat a room with a small area of ​​25 m 2 up to 50C °.
• The device is equipped with automatic overheating protection, manual step power control, operating in three modes: half power, full power, no heating in fan mode. The ballu bkx 3 heat gun is reliable and does not require periodic maintenance.
• A plastic handle is installed on the case for transporting the fan heater. The weight of the device is 1.7 kg.
• The cost of this device, in different stores of the country varies from 40 to 55 USD.

Resanta TEP-3000K if you need mobility

Portable heat gun Resanta TEP-3000K is designed for rapid air heating in residential and technical premises. This device consists of a supporting body, a protective grille, a fan located in the rear of the body, tubular heating elements made of stainless metal. Depending on the version, the control unit of this device is mounted in the upper part of the housing or on its side panel.

• The total power of this heating device is 3 kW, and the productivity is 300 m 3 / h, which is enough to heat rooms up to 30 m 2 in area.
• The device is powered from a single-phase network 200V 50Hz. With help three-position controller, you can set the desired heating temperature of the heating elements, which is: in 1 position– without heating, in position 2 – 1500W, in position 3 position- at full power. In addition, an additional regulator allows you to smoothly set the desired temperature for heating the air flow.
• The Resant TEP-3000K heat gun is equipped with built-in thermal protection and automatically turns off the device when overheated. On the body of the device is a convenient handle for carrying this device.
• The mass of the heat gun is 5.1 kg.
• The cost of this device in retail stores in Russia varies from 70 to 90 USD.

Silent cannon Neoclima kх 2

The neoclima kx 2 heat gun allows you to create a local flow of heated air in small domestic and residential premises, as well as in places of repair and construction work. This unit is equipped with a highly efficient PTC ceramic heater and a PlusO2 anti-humidity system.

• The device is powered by a single-phase, household power supply, 220V. The power of the device is 2 kW, which is enough to heat the air in a room, the area of ​​\u200b\u200bwhich is no more than 20 m 2. The performance of the device, declared by the manufacturer, is 190 m 3 / h. Also, this portable climate control equipment is equipped with a thermostat that maintains the desired temperature in the heated room. In addition, a mechanical three-mode power regulator is installed in this device: 1 - 1 kW, 2 - work with full power, 3 - without heating in fan mode.
• The specially designed design of the axial fan allows it to operate without making any noise, which is an undoubted advantage of this device. The installed thermal protection in automatic mode will turn off the power to this heater in case of overheating.
• Reliable and fireproof, neoclima kx 2 makes a compact metal anti-vandal case with a polymer composition applied to it.
• There is a handle on the case for convenient transportation of this device, the mass of which is 2.36 kg.
• The price of the device in some stores varies from 47.5 USD. e up to 65 at. e

Equation 3000 BT - safety first

The ceramic heat gun 3000 W equation is an excellent example of a fan heater from China. A fairly inexpensive, powerful and high-quality device, not much different from similar models from other manufacturers. The only difference between it and other fan heaters is that it is equipped with a high-quality ceramic 3 kW heater. Such power is enough to heat a dwelling, office or garage, up to 25m 2 in area.

• This machine is equipped with a mechanical switch operating modes, which it has three: 1 - fan; 2 - heating with a power of 1.5 kW; 3 - work with full power.
• In addition, this heat gun is equipped with sensor against possible overheating,which automatically disconnect the power supply of the device from the 220V household power supply. The Equation 3000 also has a safety sensor that will cut off the power supply to the heating element if the unit is turned over. Such opportunities only add to the advantages of this fan heater.
• The equation 3000 ceramic heat gun is made in a cylindrical metal case, with a fairly stable stand.
• The small dimensions and weight of the device of 2.9 kg make it possible to easily transport the device.
• The price of equation 3000, on average, is about 2 - 2.5 thousand rubles.

Fubag SIROCCO 20 M: Made in Germany!

The fubag SIROCCO 20 M electric heat gun is a new model of a fan heater, from a well-known German manufacturer, presented on the domestic market of climate technology. This representative of climate technology operates from a household electrical network with a voltage of 220 V. Due to the cylindrical shape of the case, this device has significantly increased productivity, which is 279 m 3 / h. The total power of the device is 2 kW.

• The gun fubag SIROCCO 20 M has a stepped three-position power level switch, air flow heating: 1 – fan; 2 – 1 kW; 2 - total power 2 kW. As a heating element in this device, a tubular heating element is installed, which is protected by a metal grill from foreign objects entering it.
• An important feature of this fan heater model is the presence of a built-in thermostat, the ability to change the angle of air flow, and a stable stand ensures maximum reliability of the installation of the device. In addition, this device has an overheating protection function.
• The fubag SIROCCO 20 M heat gun is a reliable device that can quickly heat residential, technical and industrial premises up to 20 m 2 in area.
• The convenient handle and rather small weight in 4,2 kg of the device, allow to transport it freely.
• The cost of fubag SIROCCO 20 M in some Russian stores is 3,650 rubles. - 4,200 rubles.

And finally

The heat guns presented in the review differ little in technical characteristics from each other. All of them are of high quality and have a standard set of functions. But the most modern and reliable, in a word, the best heat guns are equipped with a ceramic heating element.