Do you want to electrify your settlement, but don’t know how to do it? Here you will find answers to the most asked questions. After that, to conduct electricity for you will be a simple entertainment.

How to connect electricity in Fallout 4

So, you have already learned how to build, it remains to ennoble the settlement. For the operation of devices and mechanisms required in Fallout 4 electricity. In order for it to appear in the town, first build a generator. The choice of size of the generator depends on how much you plan to connect devices to it. There are devices that consume the generator resource, and there are those that are not taken into account. For example, bulbs, fans, TVs do not consume generator resources, but, say, industrial lighting, consumes 1 unit of energy. We will understand in Fallout 4 how to stretch the wire from the generator. To do this, being in the construction menu, we approach the generator and when it lights up, press the spacebar, a wire will appear that we can stretch to the desired point.

Electrification of settlements

Learning how to make electricity in Fallout 4 is easy. To do this, you need to configure the generators, power transmission towers, and electrical appliances. Often they do not know how to connect Fallout 4 electricity. It is connected using wires, and they appear only if you have enough copper.

How to conduct electricity in Fallout 4 if a wire does not appear when you press the spacebar? Then make sure that this item can be connected to the network.

How to conduct electricity in Fallout 4, if the wire length is not enough? In this case, place an intermediate support or pole.

Fallout 4 how to conduct electricity in the village? To transmit energy over distances, use poles and poles of power lines. You can build them yourself or take advantage of those already standing. To connect you will need copper, from which the wire is obtained.

How to connect electricity to Fallout 4? First you need to decide whether or not additional boxes and poles are needed. If they are not there is nowhere to connect the wire from the generator.

In Fallout 4, electricity is connected by connecting a generator and an energy type distributor, an electrical box. All nearby devices will automatically work, not even directly connected by wires.

Fallout 4 how to connect electricity in the house, if it was just built and there is nothing there? To connect electricity to the house, build a generator, connect it with wires to the electrical box, which is installed on the wall outside the house. If your house is large and there is electricity in only one part, add another box in the place where there is no light and connect it to the previous one.

Fallout 4 how to conduct electricity in the house? We approach the generator and, using a space, connect the generator to the electrical box on the wall, using the sparking wire that appears.

Wiring

Wiring is needed for manufacturing, items that are related to electricity, for repairing and modifying armor. Where to find wiring in Fallout 4 and what things should be taken apart for this?

It is contained in electronic devices:
  phone - 2 pcs.;
  tile - 2 pcs.;
  Improved guidance map - 2 pcs.;
  Military microcircuit - 5 pcs.;
  wire - 1 pc.;
  Emergency transmitter - 1 pc.;
  Disabled emergency transmitter - 1 pc.;
  Touch module - 5 pcs.

You can buy from Carla a pack of 25 pcs. You can meet her caravan in Senchuari, or at other merchants in 25, 50 pieces in a batch.
If you visited the Minutemen Castle in Fallout 4, where can I get electricity to start the transmitter? Right next to it we build two medium-sized generators and connect them to the transmitter with a space.

The question in Fallout 4 how to connect electricity to the castle will not baffle you if you electrified at least one house. In certain places, in the construction mode, we put generators, then we put the mounting boxes and switches on the walls and connect all this with wires. After that we place lighting and electrical appliances.

Modifications were made on power armor lights and a miner's helmet (on you and other characters, including enemies) - they will shine about 8 times further, which is the most successful ratio of realism and gameplay.

Modification does not affect pip-fight!

There are three options and each one has an additional option without shadows:

1. The flashlight shines 8 times more powerful (option with shadows cast by light and without)
2. The flashlight shines 5 times more powerful (option with shadows cast by light and without)
  3. The flashlight shines 2.5 times more powerful (option with shadows cast by light and without)

There is also an option that makes the light from the backlight of the pip battle more powerful (radius 3x)

It goes well with the following mods:

Installation:
  Install the selected esp with or

Or manually:

Open C: \\ Users \\% USER% \\ AppData \\ Local \\ Fallout4 \\ plugins.txt
  Add the string "file name .esp" without quotes
  Save plugins.txt
  Move the selected esp to \\ Steam \\ SteamApps \\ common \\ Fallout 4 \\ Data "
  Play!

Screenshots:

Do you want to electrify your settlement, but don’t know how to do it? Here you will find answers to the most asked questions. After that, to conduct electricity for you will be a simple entertainment.

How to connect electricity in Fallout 4

So, you have already learned how to build, it remains to ennoble the settlement. For the operation of devices and mechanisms required in Fallout 4 electricity. In order for it to appear in the town, first build a generator. The choice of size of the generator depends on how much you plan to connect devices to it. There are devices that consume the generator resource, and there are those that are not taken into account. For example, bulbs, fans, TVs do not consume generator resources, but, say, industrial lighting, consumes 1 unit of energy. We will understand in Fallout 4 how to stretch the wire from the generator. To do this, being in the construction menu, we approach the generator and when it lights up, press the spacebar, a wire will appear that we can stretch to the desired point.

Electrification of settlements

Learning how to make electricity in Fallout 4 is easy. To do this, you need to configure the generators, power transmission towers, and electrical appliances. Often they do not know how to connect Fallout 4 electricity. It is connected using wires, and they appear only if you have enough copper.

How to conduct electricity in Fallout 4 if a wire does not appear when you press the spacebar? Then make sure that this item can be connected to the network.

How to conduct electricity in Fallout 4, if the wire length is not enough? In this case, place an intermediate support or pole.

Fallout 4 how to conduct electricity in the village? To transmit energy over distances, use poles and poles of power lines. You can build them yourself or take advantage of those already standing. To connect you will need copper, from which the wire is obtained.

How to connect electricity to Fallout 4? First you need to decide whether or not additional boxes and poles are needed. If they are not there is nowhere to connect the wire from the generator.

In Fallout 4, electricity is connected by connecting a generator and an energy type distributor, an electrical box. All nearby devices will automatically work, not even directly connected by wires.

Fallout 4 how to connect electricity in the house, if it was just built and there is nothing there? To connect electricity to the house, build a generator, connect it with wires to the electrical box, which is installed on the wall outside the house. If your house is large and there is electricity in only one part, add another box in the place where there is no light and connect it to the previous one.

Fallout 4 how to conduct electricity in the house? We approach the generator and, using a space, connect the generator to the electrical box on the wall, using the sparking wire that appears.

Wiring

Wiring is needed for manufacturing, items that are related to electricity, for repairing and modifying armor. Where to find wiring in Fallout 4 and what things should be taken apart for this?

It is contained in electronic devices:
  phone - 2 pcs.;
  tile - 2 pcs.;
  Improved guidance map - 2 pcs.;
  Military microcircuit - 5 pcs.;
  wire - 1 pc.;
  Emergency transmitter - 1 pc.;
  Disabled emergency transmitter - 1 pc.;
  Touch module - 5 pcs.

You can buy from Carla a pack of 25 pcs. You can meet her caravan in Senchuari, or at other merchants in 25, 50 pieces in a batch.
If you visited the Minutemen Castle in Fallout 4, where can I get electricity to start the transmitter? Right next to it we build two medium-sized generators and connect them to the transmitter with a space.

The question in Fallout 4 how to connect electricity to the castle will not baffle you if you electrified at least one house. In certain places, in the construction mode, we put generators, then we put the mounting boxes and switches on the walls and connect all this with wires. After that we place lighting and electrical appliances.

Even before the official release, many gamers were unhappy with the chosen visual design of the game. But, as it turned out, this is easily solved with the help of devoted fans of the series.

According to the site, a player with the pseudonym SirGreenThumb has released a new modification to improve the lighting system in the game. The mod was called TrueLighting and, first of all, is intended to create realistic lighting in Fallout 4 without making major changes to the original files of the game.

Original

Maud

Original

Maud

Original

Maud

Original

Maud

Original

Maud

« I tried to maintain the initial level of illumination in the daytime, while removing only the blurriness of the picture. As for the night, I made this period longer and darker to add realism to the game"Said SirGreenThumb.

Also, judging by the description of TrueLighting, the mod makes changes to the implementation of the adaptation of the eyes of the game character to different levels of illumination. The transition between day and night will be carried out more smoothly due to the changed periods of dawn and twilight. Also, the lighting system in closed rooms and weather conditions turned out to be redesigned.